Skip to main content

Fuel Line Assembly – ¼” X 5’ w/fittings

NFES #:
000113
Category:
Fuel Handling
Updated:
Storage and Shelf Life Checks:
None

Initial Inspection/Disposal Criteria

  1. Visually inspect for evidence of use i.e., dust, oil, damage, loose or missing parts.
  2. Return to stock if there is no sign of use or damage and priming bulb can be squeezed easily.
  3. Refurbish as necessary if the assembly has been used, damaged or is incomplete.
  4. Dispose of the Fuel Line Assembly if it is not economically repairable.

Refurbishment procedures

A. Cleaning

  1. Remove dirt and oil using detergent and shop towels as necessary.
  2. Use pressure washer and degreaser to remove heavy deposits of oil and grease.

B. Repair

  1. Replace fuel hose if there are cuts, tears, burns or other defects.
  2. Tighten the quick disconnect fitting if loose.
  3. Replace cracked, torn or missing O-rings on quick disconnect fitting.
  4. Replace any ¼” fuel hose that is not gasoline, oil and ozone resistant. *Remove Goodyear INSTA-GRIP hose from service during the refurbishment process.
  5. Replace priming bulbs that are too stiff and cannot be squeezed easily.
  6. Replace fuel hose sections if assembly is not a minimum of 54” overall length.
  7. Replace worn brass swivel fittings that have been rounded over by wrenches.
  8. If assembly has an in-line fuel filter, replace the filter at each service.
  9. Secure hose connections using pinch type Ear Clamps (Oetiker® clamps).

C. Test for Performance

  1. Check function of priming bulb by squeezing; air should escape at hose-end opposite of quick disconnect fitting.
  2. Pressurize fuel line assembly to 8-10 psi and seal off, ensuring that there is no leak-down in pressure. If pressure will not hold, submerge in water or spray hose with soapy water to indicate source of air leak, repair as necessary and retest.

D. Repackaging

  • Local cache option.

 

NWCG Latest Announcements

2023 Wildland Fire EMS Awards

Date: May 24, 2024
Contact: NWCG Emergency Medical Committee 

The NWCG Emergency Medical Committee (EMC) announces the recipients of the 2023 Wildland Fire EMS Awards. EMC annually recognizes individuals and groups who have demonstrated outstanding actions or accomplishments that are above and beyond the expectation of one’s normal mission or job duties.

Congratulations to all the awardees and nominees. Through leadership and initiative, they have made significant contributions to the safety of the wildland fire community. These awards are well deserved.

References:

2023 Wildland Fire EMS Awards

NWCG Emergency Medical Committee

Next Generation Position Task Books

Date: May 21, 2024
Contact: NWCG Training 

NWCG is excited to announce the release of Next Generation Position Task Books (Next Gen PTBs). The Next Gen PTB is part of the Incident Performance and Training Modernization (IPTM) effort. Next Gen PTBs are intended to be used in conjunction with Incident Position Standards to support constructive conversations between trainees and evaluators, set baseline standards, and enhance speed to competency.

Next Gen PTBs and Incident Position Standards are now available for Crew Boss, Single Resource (CRWB) and Prescribed Fire Burn Boss Type 2 (RXB2). As positions go through IPTM, Next Gen PTBs will be developed and published.

References:

NWCG Position Task Books

Incident Performance and Training Modernization (IPTM)

Updated NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

Date: May 10, 2024
Contact: IFUASS Qualification and Curriculum Board (IFUASS) 

The 2024 revision of the NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515 is now available. PMS 515 standardizes the processes and procedures for interagency use of Unmanned Aircraft Systems (UAS), including pilot inspections and approvals. This publication is now available as a PDF for easy use offline.

References:

NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

Memorandum 24-003: Removal of Type 1 Command and General Staff (C&G) Incident Position Qualification Pathways

Date: May 10, 2024
Contact: Aitor Bidaburu 

The purpose of this memorandum is to provide NWCG direction for removal of the Type 1 Command and General Staff (C&G) incident position qualification pathways to transition to Complex Incident Management (CIM). Responders may continue to utilize available NWCG pathways to attain Type 1 C&G qualifications until December 31, 2024.

References:

Memorandum 24-003

CIM Story Map