National Wildfire Coordinating Group

Can – Gasoline, Safety, 5 GL, DOT Approved

NFES Number: 
000606
Category: 
Fuel Handling
Updated: 
2022-05
Storage and Shelf Life Checks: 
Yes
Storage and Shelf Life Procedure: 
If stored outside protect from rain, snow, or any form of moisture.

Initial inspection/Disposal Criteria

  1. Inspect for fuel or mixes and dispose of properly.
  2. Using a mirror and flashlight, inspect the ceiling of the can for additional rust. Inspect all interior surfaces for rust that has pitted, is flaking, or is lifting the interior surface.  Spots larger than a quarter, or collectively multiple areas larger than a quarter, will render the can unserviceable.  Some flash rust may be present and is acceptable. 
  3. Inspect for impacts or dents to corners and seams as separation and/or leaks may occur.
  4. Inspect all threads on nozzles for serviceability.
  5. If can is a quick coupler type, push nozzle into place ensuring that lock button clicks.
  6. Inspect spring closure devices to be sure they are functioning properly.
  7. Inspect for can integrity and uniformity, i.e., collar crushed, large dents, punctures, modifications.
  8. Inspect all cotter keys and pins.
  9. Ensure that containers are properly marked and labeled.
  10. Ensure spark arrester screen is present. Replace screen as necessary.
  11. Return to stock if item shows no signs of use and passes visual inspection.
  12. Refurbish if item has been used and/or damage is repairable.
  13. Dispose of item if damage is found and it cannot be repaired.

Refurbishing Procedures

A. Cleaning

  1. Drain all existing fuel.
  2. With pressure washer and detergent wash outside of container.
  3. Clean and dry the interior of the container utilizing evacuators, swabbing, and air drying.  Using a forced air process is not recommended as excess vapors can create a hazardous environment.
  4. Turn upside down with lids off or open to dry.
  5. Spray inside of can lightly with WD-40 or similar product.

B. Repair

  1. Replace rubber O-ring in discharge port of pin-lock style gas cans.
  2. Replace any defective cotter key or pins.
  3. Wipe down outside of container and repaint if necessary.
  4. Ensure container is properly marked and labeled. Color requirement for the can is red with yellow markings. Label shall be FLAMMABLE LIQUID as well as a 1-inch yellow vinyl strip around the bottom of the can (see photo below for example) Markings are dependent on fuel type and can be accomplished using NFES tags #000805, #000802, #000803, #000801. See the NWCG Standards for Transporting Fuel, PMS 442, for more information.
  5. Chain is not required but can be utilized if easily repaired.

C. Tests for Performance

  • None

D. Repackaging

  • Ensure spout is zip tied to handle.

Closeup of the top of a fuel can with the hose zip tied to the handle. Red gas can with spout.

 

 

Reference: 

Replacement parts available from:

SAFE-T-WAY
National Sales Office
PO Box 1188 Salem, OR 44460
Phone: 330–332–3200
Fax: 330–332–2340
Fax order entry: 800–721–7216

 

 

 

Page Last Modified / Reviewed: 
2022-07-07