National Wildfire Coordinating Group

Air Tactical Group Supervisor

ATGS decorative banner: photos depicting ATGS position. ATGS Position Description: The Air Tactical Group Supervisor (ATGS) reports to the Air Operations Branch Director on Type 1 and Type 2 incidents and to the Incident Commander or Operations on initial attack or Type 3 incidents. The ATGS is responsible for managing the incident airspace and coordinating the fixed- and rotary-wing aircraft operations over an incident. (See NWCG Interagency Aerial Supervision Guide, PMS 505. Note: Aerial Supervision Modules (ASM) can function as an ATGS.)

atgs Homepage Button Position Incident Position Description Button Position Reference Materials Button Position Qualification Requirements Button

ATGS Incident Position Description

The Air Tactical Group Supervisor (ATGS) coordinates incident airspace, manages incident air traffic, and is the link between ground personnel and incident aircraft. The ATGS is an airborne firefighter who coordinates, assigns, and evaluates the use of aerial resources in support of incident objectives. The ATGS supervises the Leadplane Pilot (LPIL), Aerial Supervision Module (ASM), and Helicopter Coordinator (HLCO) positions when activated. The ATGS reports to an Incident Commander (IC) on initial attack and the Operations Section Chief (OSC), Air Operations Branch Director (AOBD), or operational designee on extended attack and complex incidents (Type 1, 2, or 3). The ATGS works in the Air Operations functional area.
Click here to comment on this IPD

Leadership Level 3, Leader of People (Develop Intent)

  • For additional information review Level 3 description, expected behaviors and knowledge, suggested development goals, and self-study opportunities.

Prepare and Mobilize

  • Ensure individual readiness.
  • Obtain and assemble information and materials needed for assignment.
  • Gather critical information pertinent to the assignment.
  • Travel to and check in at assignment.
  • Check in at assigned base of operations and with supervisor.
  • Obtain briefing from previous shift/assignment position as necessary.

Build The Team

  • Conduct self in a professional manner.
  • Establish and communicate chain of command, reporting procedures, risk management processes, radio frequency management, and aviation operational strategy.
  • Attend incident briefings if possible and obtain daily Incident Action Plan (IAP) or relevant plans and incident maps for the duration of incident.
  • Establish a common operating picture with supervisors and subordinates.
  • Establish cohesiveness among assigned resources.

Supervise and Direct Work Assignments

  • Identify, analyze, and use relevant situational information to make informed decisions and take appropriate actions.
  • Adjust actions based on changing information and evolving situation awareness. Develop and implement contingency plans. Communicate changing conditions to assigned resources and supervisor.
  • Monitor performance and provide immediate and regular feedback to assigned personnel.

Perform Air Tactical Group Supervisor-Specific Duties

  • Ensure that ATGS aircraft meet requirements in the NWCG Standards for Aerial Supervision, PMS 505, and the pilot is qualified to perform the air tactical mission per agency standards.
  • Ensure aircraft meets the mission parameters.
  • Plot coordinates on topographic maps, Sectional/World Aeronautical Charts (WACS), GPS, tablet, and other tools to navigate on incident.
  • Identify and map incident topography and landmarks in operating area to navigate on incident.
  • Ensure pilot and aerial supervisor pre-flight and pre-takeoff responsibilities are completed as outlined in the NWCG Standards for Aerial Supervision, PMS 505.
  • Complete after-takeoff duties and en route procedures. Adhere to guidelines in the NWCG Standards for Aerial Supervision, PMS 505.
  • Obtain mission briefings for initial and extended attack incidents. Record the information on an aircraft dispatch form and compile an appropriate cockpit kit of pertinent documents.
  • Provide initial attack aerial size up information for dispatch and coordinate with ground and management personnel. 
  • Coordinate with ground personnel and fire management during initial and extended attack/Incident Management Team (IMT) incidents and provide the following:
    • Fire information and size up for tactical planning.
    • Evaluation of values at risk.
    • Recommended strategies, tactics, and resources needed.
    • Information to ground crews, and seek information on type of fuels and availability.
    • Procedures for ordering tactical aerial resources.
    • Safety oversight to ground resources.
  • Evaluate the airspace surrounding the incident to identify airspace conflicts or impacts to air operations, such as military operating areas (MOA), military training routes (MTR), special-use airspace (SUA), visual flight rules (VFR) airways, or airports.
  • Coordinate with AOBD or host agency unit aviation officer to identify retardant and foam use restriction areas.
  • Report known misapplications of wildland fire chemicals near avoidance areas to AOBD or adhere to local protocol reporting procedures.
  • Follow the entry procedures listed in the NWCG Standards for Aerial Supervision, PMS 505, when entering fire traffic area (FTA) and incident airspace.
  • Conduct standard briefings to all aircraft pilots for the following situations: initial briefing, tactical briefing, describing work location, guiding aircraft to targets, transition briefing, departure briefing, and emergency briefing. Adhere to the Standard Briefing Sequence located in the NWCG Standards for Aerial Supervision, PMS 505.
  • Determine ground elevation and/or mission flight altitudes to establish FTA altitudes for incoming aircraft including helicopters, airtankers, lead planes, ASM, smokejumpers, relief aerial supervision, and media if not previously determined.
  • Coordinate fixed-wing water scooper operations with helicopter operations.
  • Receive radio contact with inbound aircraft and grant permission to enter FTA.
  • Assign air resources according to strategy, tactics, and mission priorities.
  • Approve takeoff clearance and coordinate flight for unmanned aircraft system (UAS) operations. Ensure UAS follow assigned departure route and altitude. 
  • Coordinate fixed-wing, helicopter, and mixed air traffic using pilot, aerial supervision/air traffic control (ATC), General Air Traffic Coordination Principles.
  • Coordinate helicopter air traffic while maintaining aircraft separation utilizing the following methods in the NWCG Standards for Aerial Supervision, PMS 505:
    • Vertical separation
    • Horizontal separation
    • Virtual fences
    • Helicopter routes
    • Helicopter daisy chains
    • Helicopter recon flights
    • Incident entry and exit corridors
    • Initial points, checkpoints, holding areas
    • Sequencing and interval dispatching
    • Intersecting routes
    • Non-standard patterns
  • Manage helicopter air tactics to provide continuity.
  • Perform post-mission procedures upon returning to base.
  • Temporary Flight Restrictions (TFR)
    • Initiate a request and define boundaries and dimensions for a TFR during initial attack and extended attack.
    • Provide clearance for all assigned/ordered aircraft into the incident TFR.
    • Coordinate with incident AOBD to recommend termination of an existing TFR and/or when the dimensions of the TFR should be changed.
  • Frequency Management
    • Monitor all assigned air-to-air frequencies and radio traffic, and maintain communications with assigned and en route incident aircraft.
    • Recognize and request different frequencies through dispatch or the IMT Communications Unit Leader (COML) when multiple incidents in relative proximity are sharing the same tactical frequencies.
    • Receive radio contact with inbound aircraft and grant permission to enter incident airspace.

Communicate and Coordinate

  • Utilize appropriate en route communications using common terminology and brevity with dispatch, ground resources, and other aircraft.
  • Vocalize the Prior to FTA entry portion of the Mission Checklist with pilot.
  • Coordinate with incident ground personnel, dispatch, and other aerial supervision resources to ensure continuity of aerial supervision before leaving the incident.
  • Ensure priorities and tactics are communicated and understood throughout involved functional areas.
  • Ensure clear understanding of expectations and timely communication within and across Incident Command System (ICS) functional areas and chain of command.
  • Establish communications and exchange necessary briefings/information with the following:
    • Support resources
    • Adjacent resources
    • Supervisor
    • Other ICS functional areas
  • Proactively communicate current and expected fire and weather conditions based upon continuous observations of the area.
  • Coordinate with dispatch in a timely manner regarding appropriate information: ordering, assignment, and release of incident aircraft in accordance with the needs of fire management and incident command personnel.
  • Coordinate with incident ground personnel to identify, plan, and implement logistical missions.
  • Follow procedures in the NWCG Standards for Aerial Supervision, PMS 505 when incident airspace conflicts and intrusions occur.
  • Notify dispatch center and other incident aircraft of military aircraft en route to, near, or within the operations area.
  • Provide candid feedback regarding the effectiveness of aviation operations toward meeting incident objectives.
  • Conduct debriefings with appropriate supervisor, personnel, and pilots (e.g., OSC/AOBD and helibase personnel) and recommend any necessary corrective actions regarding airspace, documenting issues in a SAFECOM as needed.
  • Conduct and/or participate in functional area briefings and After Action Reviews (AAR).

Manage Risk

  • Provide for the safety and welfare of assigned resources.
  • Adhere to required personal protective equipment (PPE) as stated in the NWCG Standards for Aerial Supervision, PMS 505.
  • Conduct mission safety briefing for pilot.
  • Apply the Risk Management Process as stated in the NWCG Incident Response Pocket Guide (IRPG), PMS 461:
    • Identify Hazards
    • Assess Hazards
    • Develop Controls and Make Risk Decisions
    • Implement Controls
    • Supervise and Evaluate
  • Adhere to Federal Aviation Administration (FAA) and agency aviation regulations.
  • Plan for medical emergencies. Ensure that assigned resources are prepared to execute the Medical Plan (ICS 206 WF). Manage the medical emergency based on procedures stated in the IAP, Medical Incident Report, or other relevant guidelines.
  • Determine need for HLCO, LPIL, ASM, or other aerial supervision resources based on span of control.
  • Monitor for hazardous flight conditions and shut down aviation operations when necessary.
  • Manage HLCO/ATGS relief staffing using relief guidelines addressing fatigue, effectiveness, and safety.
  • Manage flight emergencies according to procedures in the NWCG Standards for Aerial Supervision, PMS 505.
  • Manage missing aircraft/aircraft mishap situation according to procedures in the NWCG Standards for Aerial Supervision, PMS 505.
  • Identify and appropriately act on hazardous situations to incident aircraft.
  • Submit accident/incident reports with pertinent forms (SAFECOM, SAFENET, agency-specific forms) through established chain of command.


  • Ensure individual and pilot familiarity with the basic terms of the procurement agreement/contract and payment documents.
  • Complete appropriate payment documents daily.
  • Compile daily statistics and provide to appropriate supervisor.
  • Complete, authorize, ensure timeliness of, and route as required:


  • During transfer of command:
    • Ensure continuity of operations
    • Exchange critical safety information
    • Communicate transfer of authority through established chain of command
  • Plan for demobilization. Brief assigned resources on demobilization procedures and responsibilities. Ensure incident and agency demobilization procedures are followed.
  • Anticipate demobilization, identify excess resources, coordinate with operations to prepare demobilization schedule, and communicate with supervisor.
  • Upon demobilization, report status to home unit including reassignment or estimated time of arrival (ETA) to home unit.


Return to the top



Page Last Modified / Reviewed: 

Please Provide Feedback

NWCG values your constructive input and we thank you for taking the time to provide feedback.

Although contact information is optional, we hope that you provide a way for us to contact you in case we need clarification on your comment. If you would like to be contacted regarding your feedback, you must provide contact information. 

Due to recent hacking behavior, we are temporarily suspending our ability to upload documents.  If you need to attach additional information, please email the file to

This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.