Skip to main content

ATV - How to Properly Ride and Operate

 

Riding an ATV correctly allows the operator to control the machine easily and react more quickly to changes in terrain and environment. Proper riding posture includes:

  • head and eyes up, looking forward,
  • shoulders relaxed, with elbows bent slightly,
  • hands on the handlebars,
  • knees in toward the gas tank,
  • feet on the footrests, toes pointing straight ahead, and
  • back straight but not tense.
  • To turn an ATV, keep most of your body weight on the outside foot peg and lean your upper body into the turn. Never lower your foot to the ground for stability as it could cause ejection if foot is caught by the tire.
  • When climbing hills, shift your body weight forward to keep the front wheels on the ground.
  • If stopped while going uphill, do not apply the rear brake only. Apply equal pressure to both front and rear brakes, but never only to the rear brake. Get off the machine and turn it around to proceed down the hill.
  • When going downhill, keep the engine running and in low gear, apply both front and rear brakes with even pressure and avoid sharp turns. Slide body forward on seat towards gas tank, keeping body weight back by leaning backwards. This will help keep weight on back wheels and lessen the potential to flip the ATV over forward.
  • Avoid sidehill situations. When they are unavoidable, lean into the hill.
  • When carrying a load uphill, if possible, place load on the front of the ATV to help keep the front end of the ATV from flipping over. If going downhill, place load on back of ATV to help keep the ATV from flipping over forward. If loads cannot be adjusted, try to equalize the load on front and back if possible. Drip torches should be mounted on back.
  • Only operate an ATV under the conditions for which you have been trained, qualified for, and have experience riding.
  • As a last resort to avoid an impending collision, roll off the vehicle and kick yourself free of it.
Category

Last Modified / Reviewed:

Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee.


Follow NWCG on Twitter and Facebook

NWCG Latest Announcements

New Job Aids Available: Packing Lists for Wildland Fire Fireline Personnel and Support Staff, J-101 and J-102

Date: December 3, 2024
Contact: NWCG TRAINING

Two new job aids are now available: Packing List for Wildland Fire Fireline Personnel, J-101 and Packing List for Wildland Fire Support Personnel, J-102, should serve as a baseline for items needed on a wildland fire assignment. These lists will help personnel prepare for a 14 to 21-day assignment on the fireline or in a support role.

References:

Job Aid Catalog

NWCG Packing List for Wildland Fire Fireline Personnel, J-101

NWCG Packing List for Wildland Fire Support Staff, J-102

NWCG Equipment Technology Committee Releases Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention

Date: November 14, 2024
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention. Misaligned toolless fuel caps on Stihl chainsaws have led to recurring fuel spillage, fuel ignition, and burn injuries during wildland fire management operations.

This Safety Warning is intended to highlight the details and recommended procedures for the installation of a Stihl chainsaw toolless fuel cap, as well as how to identify and correct a misaligned, damaged, or broken fuel cap to help prevent fuel spillage.

References:

NWCG Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention

Advertencia de equipos 24-001: Prevención de derrames de la tapa de combustible sin herramientas de la motosierra Stihl

NWCG Alerts

The Incident Position Standards and Next Generation Position Task Book are now available for Equipment Time Recorder (EQTR)

Date: November 13, 2024
Contact: Incident Business Committee

NWCG is excited to announce that the NWCG Incident Position Standards for Equipment Time Recorder, PMS 350-51 and NWCG Position Task Book for Equipment Time Recorder (EQTR), PMS 311-51 are now available.

The Performance Support Package, which for EQTR, includes the Incident Position Standards and Next Generation Position Task Book were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Equipment Time Recorder Position Page

NWCG Incident Position Standards for Equipment Time Recorder, PMS 350-51

NWCG Position Task Book for Equipment Time Recorder (EQTR), PMS 311-51

The Incident Position Standards and Next Generation Position Task Book are now available for Personnel Time Recorder (PTRC)

Date: November 13, 2024
Contact: Incident Business Committee

NWCG is excited to announce that the NWCG Incident Position Standards for Personnel Time Recorder, PMS 350-53 and NWCG Position Task Book for Personnel Time Recorder (PTRC), PMS 311-53 are now available.

The Performance Support Package, which for PTRC, includes the Incident Position Standards and Next Generation Position Task Book were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Personnel Time Recorder Position Page

NWCG Incident Position Standards for Personnel Time Recorder, PMS 350-53

NWCG Position Task Book for Personnel Time Recorder (PTRC), PMS 311-53