Skip to main content

Driver/Operator

Position Description

Introduction

Operates pickup trucks, carryalls, automobiles, jeeps, station wagons, etc, having a gross vehicle weight rating (GVWR) up to 10,000 pounds to transport cargo and passengers to and from incident sites and other locations.  Vehicles may have up to four forward gears and are equipped with the normal array of driving controls.

Duties

  • Operates assigned vehicles on and off roads, through all kinds of traffic, terrain (e.g., from highway and interstate speeds to narrow mountainous roads), and weather to transport cargo or passengers.
  • Loads and unloads the vehicles and ensures that cargo is properly and safely loaded, protected, and secured.
  • Ensures proper operator maintenance, vehicle servicing, and record keeping (e.g., completes trip ticket forms following each assignment).
  • Delivers personnel, supplies and equipment to and from the fireline, base, spike camps, and airports.

Position Knowledge and/or Requirements

  • Must possess a valid operator’s license.
  • Basic knowledge of any governing Federal and State highway laws.
  • Ability to operate assigned vehicles under a variety of conditions (e.g., interstate highways, urban and rural areas, mountainous terrain, adverse weather conditions during the day and night).
  • Ability to successfully complete respective license renewal requirements (e.g., non-sensitive background check, written and skills tests, medical/physical examinations).

Supervisory Controls

The supervisor provides individual assignments by indicating generally what is to be done, limitations, quality and quantity expected, deadlines, and priority of assignments.

The incumbent uses initiative in carrying out previously performed assignments independently without specific instructions.  Deviations from these types of assignments, problems, or aspects of unusual assignments not covered by general instructions are referred to the supervisor for decision or assistance.

The supervisor assures that finished work and methods used are technically accurate and in compliance with instructions.

Guidelines

Procedures for performing the work have been established and, for the most part, specific guidelines are available.

The number and similarity of guidelines and work situations require the incumbent to use judgment in selecting the most appropriate procedure(s) or approach in specific cases (e.g., when enroute, or when overseeing or loading of cargo).

Situations to which the existing guidelines cannot be applied are referred to the supervisor.

Complexity

The work consists of various clear-cut related duties.  Generally, the incumbent has little choice in deciding what needs to be done due to the existence of the previously established, specific guidelines and procedures.

Decisions regarding what needs to be done require the incumbent to recognize the differences between a few easily recognizable situations.

Actions to be taken differ according to the differences between the various specific tasks to be performed.

Scope and Effect

The work involves the execution of specific routine procedures.

The service provided facilitates the work of others.

Personal Contacts

Contacts are generally with incumbents of the same work unit (i.e., those incumbents associated with the incident).

Purpose of Contacts

The purpose of contacts is to obtain, clarify, or give facts or information about the assignment.

Physical Demands

The work requires some physical exertion such as required for over-the-road assignments, and some lifting of moderately heavy items.

Work Environment

The work environment involves moderate risks and discomfort.

 

NWCG Latest Announcements

Updated NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

Date: May 10, 2024
Contact: IFUASS Qualification and Curriculum Board (IFUASS) 

The 2024 revision of the NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515 is now available. PMS 515 standardizes the processes and procedures for interagency use of Unmanned Aircraft Systems (UAS), including pilot inspections and approvals. This publication is now available as a PDF for easy use offline.

References:

NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

Memorandum 24-003: Removal of Type 1 Command and General Staff (C&G) Incident Position Qualification Pathways

Date: May 10, 2024
Contact: Aitor Bidaburu 

The purpose of this memorandum is to provide NWCG direction for removal of the Type 1 Command and General Staff (C&G) incident position qualification pathways to transition to Complex Incident Management (CIM). Responders may continue to utilize available NWCG pathways to attain Type 1 C&G qualifications until December 31, 2024.

References:

Memorandum 24-003

CIM Story Map

2024 Professional Reading Program

Date: April 26, 2024
Contact: Wildland Fire Leadership Development Program (WFLDP) 

The Wildland Fire Leadership Development Program is announcing the 2024 Professional Reading list! The intent of the Professional Reading Program is to promote the reading and discussion of these books throughout the year. Discussion guides are provided and the corresponding Wildland Fire Leadership Levels have been identified.

The five books chosen for this year are: Young Men and Fire by Norman Maclean, The Wisdom of the Bullfrog by William H. McRaven, The Art of Clear Thinking by Hasard Lee, Emotional Agility by Susan David, and Writing to Persuade by Trish Hall.

References:

Professional Reading Program

Wildland Fire Leadership Levels

NWCG Training Catalog now on Wildland Fire Learning Portal

Date: April 25, 2023
Contact: NWCG Training  

The National Wildfire Coordinating Group (NWCG) has migrated the training catalog from the NWCG website to the Wildland Fire Learning Portal (WFLP) as part of our ongoing efforts to streamline processes and improve efficiency. To facilitate this transition, the training catalog remains available on www.nwcg.gov through April 2024.

Starting May 2024, the training catalog will no longer be accessible on www.nwcg.gov. However, you can still access the complete training catalog by logging in as a guest to the WFLP.

References:

Wildland Fire Learning Portal