Skip to main content

Tank – Gasoline, 5 GL (18.9L), Pump Adapted

NFES #:
000218
Category:
Fuel Handling
Updated:
Storage and Shelf Life Checks:
None

Initial Inspection/Disposal Criteria

  1. Check for fuel in tank.  Evacuate tank if fuel is present.
  2. Inspect threads on connector for serviceability.  Inspect for missing or cracked and damaged gasket on cap.  Inspect all interior surfaces for rust that has pitted, is flaking or is lifting the interior surface.  Rust spots larger than a quarter or collectively multiple areas larger than a quarter will render the can unserviceable.  Some “flash rust” maybe present and is acceptable.  Using a mirror and flashlight, inspect the ceiling of the can for additional rust.
  3. Inspect for impacts or dents to corners and seams as separation and/or leaks may occur.
  4. Inspect and tighten quick release fuel valve. 
  5. Return to stock if clean and in unused condition.
  6. Refurbish item if tank is free of damage or rust.
  7. Dispose of item if tank damage is significant, leaks are detected or rust is found inside of tank.

Refurbishing Procedures

A. Cleaning

  1. Drain existing fuel and purge. Dispose of fuel according to hazardous material regulations and local policies.
  2. Use an air hose to dry the interior of the tank and remove debris inside the female opening of the quick disconnect coupling.
  3. Turn upside down with lids off to dry.
  4. Clean vent hole to ensure serviceability.
  5. Wipe down outside of container and repaint if necessary.

B. Repair

  1. Replace missing, cracked or stiff gaskets.
  2. Ensure fuel geyser warning label is present and legible. Reference cache memo 17-2 Fuel Geysering Awareness Sticker and Labels.
  3. Flammable liquid labels are not required for this fuel tank. Refer to NWCG Standards for Transporting Fuel, PMS 442.

C. Testing for performance

  1. Check all threads on connector for serviceability.

D. Repackaging

  1. Local cache option
  2. Recommended when shipping, pack in carton NFES #008052 (16”x14”x10”)

 

NWCG Latest Announcements

Updated NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

Date: May 10, 2024
Contact: IFUASS Qualification and Curriculum Board (IFUASS) 

The 2024 revision of the NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515 is now available. PMS 515 standardizes the processes and procedures for interagency use of Unmanned Aircraft Systems (UAS), including pilot inspections and approvals. This publication is now available as a PDF for easy use offline.

References:

NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

Memorandum 24-003: Removal of Type 1 Command and General Staff (C&G) Incident Position Qualification Pathways

Date: May 10, 2024
Contact: Aitor Bidaburu 

The purpose of this memorandum is to provide NWCG direction for removal of the Type 1 Command and General Staff (C&G) incident position qualification pathways to transition to Complex Incident Management (CIM). Responders may continue to utilize available NWCG pathways to attain Type 1 C&G qualifications until December 31, 2024.

References:

Memorandum 24-003

CIM Story Map

2024 Professional Reading Program

Date: April 26, 2024
Contact: Wildland Fire Leadership Development Program (WFLDP) 

The Wildland Fire Leadership Development Program is announcing the 2024 Professional Reading list! The intent of the Professional Reading Program is to promote the reading and discussion of these books throughout the year. Discussion guides are provided and the corresponding Wildland Fire Leadership Levels have been identified.

The five books chosen for this year are: Young Men and Fire by Norman Maclean, The Wisdom of the Bullfrog by William H. McRaven, The Art of Clear Thinking by Hasard Lee, Emotional Agility by Susan David, and Writing to Persuade by Trish Hall.

References:

Professional Reading Program

Wildland Fire Leadership Levels

NWCG Training Catalog now on Wildland Fire Learning Portal

Date: April 25, 2023
Contact: NWCG Training  

The National Wildfire Coordinating Group (NWCG) has migrated the training catalog from the NWCG website to the Wildland Fire Learning Portal (WFLP) as part of our ongoing efforts to streamline processes and improve efficiency. To facilitate this transition, the training catalog remains available on www.nwcg.gov through April 2024.

Starting May 2024, the training catalog will no longer be accessible on www.nwcg.gov. However, you can still access the complete training catalog by logging in as a guest to the WFLP.

References:

Wildland Fire Learning Portal