Skip to main content

Hazard Mitigation Through Risk Management

 

Risk management doesn’t get in the way of doing the mission – it is the way we do the mission. The risk management process assists in ensuring that critical factors and risks of the fireline work environment are considered during decision-making. Good risk management utilizes a five-step process:

Step 1 – Situational Awareness:

  • Obtain information.
  • Scout the fire.
  • Identify hazards.
  • Consider all aspects of current and future situations.
  • Consider known historical problem areas (apply local area information from the Fire Danger PocketCard).
  • Recognize the need for action.
  • Demonstrate ongoing awareness of fire assignment status.
  • Note deviations.
  • Attempt to determine why any discrepancies exist before proceeding.

Step 2 – Hazard Assessment:

  • Assess hazards to determine risks (e.g., fire behavior, snags, unburned fuels, work/rest).
  • Use the Look Up, Down, and Around and the Tactical Watch Outs (both located in the Incident Response Pocket Guide [IRPG], PMS 461) to identify high-risk tactical hazards.
  • Assess the impact of each hazard in terms of potential loss, cost, and mission/operational degradation based on probability and severity (probability: how likely an event will occur; severity: consequences if the event occurs). Keep in mind that increased exposure time increases probability.

Step 3 – Hazard Control:

  • Determine the best approach to mitigate or control the risk based on the hazards assessed.
  • Establish controls (e.g., anchor point, Lookouts, Communications, Escape Routes, and Safety Zones [LCES], utilize downhill checklist, limit exposure time).
  • As control measures are developed, reevaluate each risk until it is reduced to a level where benefits outweigh potential costs.

Step 4 – Decision Point (decision to accept or not accept the risks associated with an action):

  • Ask yourself: (1) are controls in place for identified hazards, (2) are tactics selected based on expected fire behavior, and (3) are instructions given and understood?
  • Make certain the decision is made at the appropriate level. If not, elevate to a higher level.
  • Reject the action if the risk is unacceptable.

Step 5 – Evaluation:

  • Ensure controls are implemented and accomplished to standards.
  • Supervise/evaluate the effectiveness of controls and decisions. Monitor the situation and adjust risk controls as necessary.
  • Anticipate consequences of decisions; if controls do not work, determine the problem, and derive a better solution.
  • Adjust actions as the situation changes. Maintain situational awareness.
  • Solicit and provide feedback throughout the process.

 

Last Modified / Reviewed:

Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee.


Follow NWCG on Twitter and Facebook

NWCG Latest Announcements

The Incident Position Standards and Next Generation Position Task Book are now available for Medical Unit Leader (MEDL)

Date: October 16, 2024
Contact: Incident Medical Subcommittee

NWCG is excited to announce that the NWCG Incident Position Standards for Medical Unit Leader, PMS 350-39 and NWCG Position Task Book for Medical Unit Leader (MEDL), PMS 311-39 are now available.

The Performance Support Package, which for MEDL includes the Incident Position Standards and Next Generation Position Task Book, were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Medical Unit Leader Position Page

NWCG Incident Position Standards for Medical Unit Leader, PMS 350-39

NWCG Position Task Book for Medical Unit Leader (MEDL), PMS 311-39

The Wildland Fire Learning Portal is Now Available

Date: October 9, 2024
Contact: Wildland Fire Learning Portal

The Wildland Fire Learning Portal (WFLP) is back online following a migration to a new learning management system (LMS) application. The WFLP team is actively addressing any issues that may arise as a result of the update, and appreciates your patience as the team works to enhance your experience. NWCG will share information from the WFLP as it is available.

Should you have any issues with accessing or using the WFLP, please use the link below to submit a ticket through the Help Center.

References:

Wildland Fire Learning Portal

Wildland Fire Learning Portal Help Center

NWCG Equipment Technology Committee Releases New Equipment Bulletins

Date: September 27, 2024
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released three new Equipment Bulletins:

  • ETC-EB-24-003 Diesel exhaust fluid (DEF) in fuel containers.
  • ETC-EB-24-004 Two-compartment fuel and oil container (Dolmar) unavailable in the United States (US) and reminders for upkeeping current inventories.
  • ETC-EB-24-005 Personal Protective Equipment (PPE): Inspection, Care, and Maintenance.

These bulletins remind field going personnel of important issues related to equipment for wildland firefighting efforts.

References:

NWCG Alerts

ETC-EB-24-003 Diesel exhaust fluid (DEF) in fuel containers

ETC-EB-24-004 Two-compartment fuel and oil container (Dolmar) unavailable in the United States (US) and reminders for upkeeping current inventories

ETC-EB-24-005 Personal Protective Equipment (PPE): Inspection, Care, and Maintenance

The Experiential Learning Subcommittee is looking for your feedback on Staff Rides

Date: September 20, 2024
Contact: Ashleigh D'Antonio and George Risko, Leadership Committee

The Experiential Learning Subcommittee needs to hear from the field about where the greatest need lies regarding staff rides and their accessibility.

  • Do you have an event you would like to turn into a learning experience?
  • Do you have a staff ride built, but are struggling to implement the delivery?
  • Do you need help building capacity?
  • What other ideas do you have to support experiential leadership training?

Fill out this short survey below to help us help you.

References:

Staff Rides: Feedback

Staff Rides