Skip to main content

Resource Base Location

Submitted by Anonymous (not verified) on

Points depicting locations at which a given resource base exists, originates, or is dispatched from (home location) as defined in the specific layer description. Standard may be adapted for use with many types of resource base locations.

National Geographic Area Coordination Center Boundary Polygon

Submitted by Anonymous (not verified) on

Geographic boundary polygons depicting administrative areas of Geographic Area Coordination Centers (GACCs). GACCs are the largest subdivision within the National Interagency Coordination Center (NICC) tiered dispatch system. GACCs provide logistical coordination of emergency management resources within their boundaries and with other GACCs. GACC Boundaries are further subdivided into Local Dispatch Areas.

National Dispatch Center Office Point

Submitted by Anonymous (not verified) on

Geographic points depicting the locations of Dispatch Centers within Tier 1, 2, and 3 Dispatch Areas across the nation. Tier 1 refers to the National Interagency Coordination Center (NICC) which administers the entire country. Tier 2 are the Geographic Area Coordination Centers (GACCs). Tier 3 are the Local Dispatch Centers. Depending on availability of addresses, points may represent actual Dispatch Center offices or only the general city in which the center exists. If no address is listed in the DispAddress field, the location is specific to the city only and not to an address.

Helispots

Submitted by Anonymous (not verified) on

The helispot data standard deals with the spatial location and minimum critical attribute information for planning and operational use. The purpose is to store information about established helispots for land management agencies. The standard is not meant to store temporary helispot locations created during incident response, but the data will be available for reference during incident response. Data will persist in the National Incident Feature Service.

Fire Restrictions Polygon

Submitted by Anonymous (not verified) on

This geospatial layer depicts areas where measures have been taken by jurisdictional agencies to impose bans and standards of use on certain human activities that could lead to the cause of wildland fire. These rules are called fire restrictions.

Subscribe to

NWCG Latest Announcements

FAQ Now Available for Archiving Type 1 and Type 2 Incident Positions

Date: Aug 6, 2025
Questions? Please contact:
Incident and Position Standards Committee

To support the transition to Complex Incident Management (CIM), NWCG will archive all Type 1 and Type 2 Command and General Staff (C&G) position qualifications in January 2026, as outlined in NWCG Executive Board Memo 25-002. To assist with this transition, a new Frequently Asked Questions (FAQ) document is now available.

This resource answers common questions about the status of Type 1 and Type 2 qualifications, impacts to incident qualification management, training requirements, and resource ordering considerations. Review the full FAQ to learn more.

For additional information on CIM and the transition of C&G positions, see NWCG Executive Board Memos 23-005, 24-005, and 25-002, as well as the Incident Workforce and Development Group webpage.

References:

NWCG Type 1 & Type 2 Position Archiving FAQ

NWCG Executive Board Correspondence

Incident Workforce Development Group

Incident and Position Standards Committee

Incident Position Standards and the Next Generation Position Task Books Now Available for UASD, UASM, UASL and UASP

Date: July 31, 2025
Questions?  Please contact:
Interagency Fire Unmanned Aircraft Systems Subcommittee
 

NWCG is excited to announce that Incident Position Standards and the Next Generation Position Task Books are now available for all four Unmanned Aircraft Systems positions:

  • Unmanned Aircraft Systems, Data Specialist (UASD)
  • Unmanned Aircraft Systems, Manager (UASM)
  • Unmanned Aircraft Systems, Module Leader (UASL)
  • Unmanned Aircraft Systems Pilot (UASP)

The Performance Support Packages for these positions were developed as part of the Incident Performance and Training Modernization effort. These resources support trainees, qualified personnel, and evaluators in their respective roles.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1, scheduled for January 2026.

References:

NWCG Unmanned Aircraft Systems, Data Specialist Position Page

NWCG Unmanned Aircraft Systems, Manager Position Page

NWCG Unmanned Aircraft Systems, Module Leader Position Page

NWCG Unmanned Aircraft Systems Pilot Position Page

Incident Position Standards and the Next Generation Position Task Books Now Available for RADO and INCM

Date: July 30, 2025
Questions?  Please contact:
Incident Logistics Subcommittee
 

NWCG is excited to announce that Incident Position Standards and the Next Generation Position Task Books are now available for Radio Operator (RADO) and Incident Communications Center Manager (INCM).

The Performance Support Packages for these positions were developed as part of the Incident Performance and Training Modernization effort. These resources support trainees, qualified personnel, and evaluators in their respective roles.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1, scheduled for January 2026.

References:

NWCG Radio Operator Position Page

NWCG Incident Communications Center Manager Position Page

ETC Equipment Bulletin: 25-004 NEW Aquatic Invasive Species – Golden Mussels

Date: July 29, 2025
Questions?  Please contact:
Equipment Technology Committee
 

The Equipment Technology Committee (ETC) issued Equipment Bulletin: 25-004, notifying the wildland fire community about a newly discovered invasive species and actions to take if found. Golden mussels, a highly invasive species recently identified in California, pose a significant risk to native ecosystems, infrastructure, and fire equipment. These mussels rapidly colonize hard and soft surfaces, including aquatic plants and fire equipment, clogging pipes, fouling motors, disrupting water systems, and impacting native species.

To help prevent their spread, fire personnel must follow the decontamination procedures outlined in the NWCG Guide to Preventing Aquatic Invasive Species Transport by Wildland Fire Operations, PMS 444. Additionally, report any sightings immediately to your Lead Resource Advisor and include clear, close-up photos and location details.

Read the complete ETC Equipment Bulletin: 25-004 to learn more. 

References:

NWCG Alerts

ETC Equipment Bulletin: 25-004

NWCG Guide to Preventing Aquatic Invasive Species Transport by Wildland Fire Operations, PMS 444