Skip to main content

USDI Bureau of Land Management Directory

This section includes a print button at the bottom of the page. Print directly to a printer or to mimic a booklet, print to a pdf and then print the pdf using booklet or multiple page options.

Address

3833 S Development Ave
Boise ID 83705-5398
Phone: 208-387-5180
Fax: 208-387-5199

[view:pms504_roster=block_504_roster=22086]

Address

AFS Bldg 1541, Gaffney Rd
Ft. Wainwright, AK 99703
Phone: 907-356-5500
Fax: 907-356-5678

Shipping Address

PO Box 35005
Ft. Wainwright, AK 99703

[view:pms504_roster=block_504_roster=22087]

Address

1 North Central Ave Ste 800
Phoenix, AZ 85004-4427
Phone: 602-417-9308
Fax: 602-417-9554

[view:pms504_roster=block_504_roster=22088]

Address

2800 Cottage Way Rm W-1924
Sacramento, CA 95825
Phone: 916-978-4600
Fax: 916-978-4438

[view:pms504_roster=block_504_roster=22089]

Address

2774 Landing View Lane
Grand Junction, CO 81506
Phone: 303-239-3809
Fax: 303-239-3811

[view:pms504_roster=block_504_roster=22090]

Address

1387 South Vinnell Way
Boise, ID 83709
Phone: 208-373-3873
Fax: 208-373-3850

[view:pms504_roster=block_504_roster=22091]

Address

5001 S. Gate Drive
Billings, MT 59101-4669
Phone: 406-896-2912
Fax: 406-896-2950

Fire/Aviation Office Address
​1299 Rimtop Drive
Billings, MT 59105

Shipping Address

1299 Rimtop Drive
Billings, MT 59105

[view:pms504_roster=block_504_roster=22092]

Address

1340 Financial Blvd
Reno, NV 89502
Phone: 775-861-6400
Fax: 775-861-6668

Shipping Address

PO Box 12000
Reno, NV 89502

[view:pms504_roster=block_504_roster=22093]

Address

1220 SW Third Ave
Portland, OR 97204
Phone: 503-808-6593
Fax: 503-808-6799

[view:pms504_roster=block_504_roster=22094]

Address

440 W 200 S, Ste 500
Salt Lake City, UT 84101-1345
Phone: 801-539-4241
Fax: 801-539-4198

[view:pms504_roster=block_504_roster=22095]

Address

5353 Yellowstone Rd
Cheyenne, WY 82009
Phone: 307-775-6237
Fax: 307-775-6098

Shipping Address

PO Box 1828
Cheyenne, WY 82003

[view:pms504_roster=block_504_roster=22096]

Last Modified / Reviewed:

Print PDF

NWCG Latest Announcements

NEW! S-130, Firefighter Training (Blended) Now Available

Date: June 10, 2025
If you have questions, please visit our FAQ page. 
If your question is not answered there, you can 
submit your question using our Contact Us form. 
 

The S-130, Firefighter Training (Blended), equips new wildland firefighters with essential skills through a mix of online learning and hands-on training. The course features a required online component and an instructor-led exercise, reinforcing online concepts with practical performance-based training.

The course builds competencies in wildland fire operations, safety, and equipment use, applicable across various operational environments. Both the online component and instructor-led field exercise must be completed to receive a certificate of completion. Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-130, Firefighter Training (Blended).

References:

S-130, Firefighter Training (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002

2024 Wildland Fire Emergency Medical Service Awards

Date: May 22, 2025
Questions?  Please contact:
Emergency Medical Committee

The NWCG Emergency Medical Committee (EMC) is proud to announce the recipients of the 2024 Wildland Fire Emergency Medical Service Awards. Each year, EMC recognizes individuals and groups who have demonstrated exceptional actions or accomplishments that go above and beyond their normal mission or job duties.

Congratulations to all the awardees and nominees. Through leadership and initiative, they have made significant contributions to the safety and well-being of the wildland fire community. These honors are well deserved.

References:

2024 Wildland Fire EMS Awards

NWCG Emergency Medical Committee