Skip to main content

Operations Map

Note: The Situation Map has been deprecated as a map standard. The Operations map should be used as an acceptable substitute for task book purposes.

Product Description

The Operations Map effectively displays geographic and incident features for use by operations personnel (Operations Section Chief, Operations Branch Directors, Division/Group Supervisors) either in the Incident Command Post or out in the field.

Target Audience

Operations Section, Logistics Section, Planning Section, Safety Officer.

Guidelines

  • Standard Incident Command System (ICS) symbology.
  • Printed in color to enable clear depiction of incident and map features.
  • Size varies but usually anywhere from tabloid (11” x 17”) to “Arch E” (36” x 48”) size.
  • Scale varies based on request, area covered, and map size.
  • May be one map for the entire incident or multiple maps for various areas of interest, such as organizational divisions.

Standard Elements

All map products produced should include the STANDL-SGD cartographic elements.

Data

  • Wildfire Daily Fire Perimeter (Polygon) with Contained and Uncontained Perimeter Lines.
  • Event Lines (including, but not limited to: Planned and Completed lines, Access Routes, Escape Routes).
  • Event Points (including, but not limited to: Camps, Dip Sites, Draft Sites, Drop Points, Hazards, Helispots, Helibase, Incident Command Post, and Safety Zones).
  • Assignment (Division, Branch, Zone) breaks and labels.
  • Land Ownership / Jurisdiction.
  • Special Management Areas (including, but not limited to: Wilderness, Wilderness Study Areas, Inventoried Roadless Areas).
  • Structures.
  • Utilities (including, but not limited to: Powerlines, Substations, Pipelines).
  • Topographic or Orthoimagery Base.
  • Other Situation Unit Leader (SITL)-requested data.

Examples

These are examples from actual incidents and may include non-standard elements.

Also note that examples use the standard symbols at the time of their creation and may not reflect the current GeoOps symbology. Map elements, incident features, and composition remain consistent across these visual changes.

  1. 2022 Tenmile Fire
  2. 2021 Greenwood Fire
  3. 2021 Caldor Fire (West Zone Overview)
  4. 2022 Mosquito Fire (Overview)
  5. 2022 Kootenai River Complex (Overview)
  6. 2017 Snake Ridge Fire
  7. 2017 Pinal Fire
  8. 2017 Burro Fire
  9. 2017 Southern LNU Complex (Atlas)
  10. 2015 Valley Fire (West Ops Map)
  11. 2015 Valley Fire (East Ops Map)

 

Last Modified / Reviewed:

Print PDF

NWCG Latest Announcements

ETC Equipment Bulletin: 25-003 Flame-Resistant Shirt Survey

Date: June 12, 2025
Questions?  Please contact:
Equipment Technology Committee

The U.S. Forest Service National Technology and Development Program (NTDP) is seeking input on the Forest Service-designed flame-resistant (FR) shirt, currently available through the National Interagency Support Cache system and FedMall.

NTDP is conducting a product review to improve future FR shirt designs. As part of this effort, a short survey is now open for federal employees who have worn any of three recent FR shirt models. Feedback will guide design improvements to better meet the needs of wildland firefighters.

To comply with the Paperwork Reduction Act, responses are limited to federal employees. The survey is open through September 12, 2025. 

References:

NWCG Alerts

ETC Equipment Bulletin: 25-003

NEW! S-130, Firefighter Training (Blended) Now Available

Date: June 10, 2025
If you have questions, please visit our FAQ page. 
If your question is not answered there, you can 
submit your question using our Contact Us form. 
 

The S-130, Firefighter Training (Blended), equips new wildland firefighters with essential skills through a mix of online learning and hands-on training. The course features a required online component and an instructor-led exercise, reinforcing online concepts with practical performance-based training.

The course builds competencies in wildland fire operations, safety, and equipment use, applicable across various operational environments. Both the online component and instructor-led field exercise must be completed to receive a certificate of completion. Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-130, Firefighter Training (Blended).

References:

S-130, Firefighter Training (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002