Skip to main content

 

 

Collection of Historical Photographs, Bar Harbor Fire

Click the image to enlarge.

Before and after pictures of Dolliver's Dump on the Bar Harbor Fire

Before and after pictures of Dolliver's Dump on the Bar Harbor Fire.

Four photos show the severe wind damage of uprooted trees and the tremendous regeneration of growth after one growing season.

Photos showing the severe wind damage of uprooted trees and the tremendous regeneration of growth after one growing season.

 
Before and after photos of the Bar Harbor Fire. The third picture shows vegitation growth 36 years later.

Northwest from Cadillac Mountain road, before and after photos of the Bar Harbor Fire showing clean up and regeneration of burned areas.

Photos from the foot of Jordan Pond showing Bubble Mountain seen from the Bar Harbor Fire. NPS crews cleaned up the burn area in second photo. The third photo shows regeneration of vegetation 36 years later.

Photos from the foot of Jordan Pond showing before and after photos of the Bar Harbor Fire showing clean up and regeneration of burned areas.

 
Before and after photos Southwest to Sargent Mountain, south of the ridge, from summit of the south Bubble Mountain. Third photo shows the regrowth of vegetation 36 years later.

Before and after photos southwest to Sargent Mountain, south of the ridge, from the summit of the South Bubble Mountain.

Before and after photos north to Eagle Lake from summit of North Bubble Mountain. Third photos shows the regrowth of birch and poplar stands 36 years later.

Before and after photos north to Eagle Lake from summit of North Bubble Mountain.

 
Before and after photos from saddle between North and South Bubble Mountain. Third photo shows the clean up of burned timber waiting to be logged.

Before and after photos from the saddle between North and South Bubble Mountain.

View of Bar Harbor from Cadillac Mountain summit parking lot showing burned forest in the background. Second photo is 36 years later showing regrowth of pitch pine, but the trees and shrubs show some stunted growth.

View of Bar Harbor from Cadillac Mountain summit parking lot.

 
Two photos show the before and after of a stand of birch and aspen. 36 years after their is still evidence of stumps and cut logs left from clean up operations on the Bar Harbor Fire.

Before and after photos of a stand of birch and aspen on the Bar Harbor Fire.

Aerial news photo of the Bar Harbor Fire town dock used as a refuge at the peak of the fire's intensity.

Aerial news photo of the Bar Harbor town dock used as a refuge at the peak of the fire's intensity.

 
Newpaper photo of volunteer firefighters resting at Red Cross canteen on the villiage green at Bar Harbor.

Newspaper photo of volunteer firefighters resting at Red Cross canteen.

Newspaper photos of a farmhouse burning and the skelton remains after during the Bar Harbor Fire.

Newspaper photos of a farmhouse burning and the skeletal remains after.

 
Six photos of the skeltal remains of burned out homes on the Bar Harbor Fire.

Six photos of the skeletal remains of burned-out homes.

Burned remains of a home after the Bar Harbor Fire, only the chimminey remains standing.

Burned remains of a home after the Bar Harbor Fire.

 
Newspaper photo of an entire neighborhood burned to the ground by fire during the Bar Harbor Fire.

A newspaper photo of an entire neighborhood burned to the ground by fire.

Group of men holding hose lines combating fire during the Bar Harbor Fire.

Group of men holding hose lines combating the fire.

 

NWCG Latest Announcements

ETC Equipment Bulletin: 25-003 Flame-Resistant Shirt Survey

Date: June 12, 2025
Questions?  Please contact:
Equipment Technology Committee

The U.S. Forest Service National Technology and Development Program (NTDP) is seeking input on the Forest Service-designed flame-resistant (FR) shirt, currently available through the National Interagency Support Cache system and FedMall.

NTDP is conducting a product review to improve future FR shirt designs. As part of this effort, a short survey is now open for federal employees who have worn any of three recent FR shirt models. Feedback will guide design improvements to better meet the needs of wildland firefighters.

To comply with the Paperwork Reduction Act, responses are limited to federal employees. The survey is open through September 12, 2025. 

References:

NWCG Alerts

ETC Equipment Bulletin: 25-003

NEW! S-130, Firefighter Training (Blended) Now Available

Date: June 10, 2025
If you have questions, please visit our FAQ page. 
If your question is not answered there, you can 
submit your question using our Contact Us form. 
 

The S-130, Firefighter Training (Blended), equips new wildland firefighters with essential skills through a mix of online learning and hands-on training. The course features a required online component and an instructor-led exercise, reinforcing online concepts with practical performance-based training.

The course builds competencies in wildland fire operations, safety, and equipment use, applicable across various operational environments. Both the online component and instructor-led field exercise must be completed to receive a certificate of completion. Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-130, Firefighter Training (Blended).

References:

S-130, Firefighter Training (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002