Skip to main content

McLeod – 11” Wide w/Plastic Sheath

NFES #:
000296
Category:
Tools
Updated:
Storage and Shelf Life Checks:
None

Initial Inspection/Disposal Criteria

  1. Inspect for obvious damage to cutting edge, rake fingers, and handle.  Inspect for broken blades, loose heads, missing or severely bent fingers, short or nonstandard handles.
    1. Head
      • Blade to be at least 10 to 14 inches wide from handle base.  USE TEMPLATE
      • Handle base not tilted, bent, or distorted.
      • Blade ends have not been rounded or severely tapered so that they cannot be ground to specifications.
      • Proper angle of cutting edge as per tool sharpening gauge NFES #000510.
    2. Handle
      • Handle must be straight.
      • Inspect for cracks, chips, or open grain.
      • Head loose on handle (loose or missing rivets).
      • Inspect for tape residue, or other residue (tar, sap, etc.).
  2. Return to stock if item does not show signs of use and passes visual inspection.
  3. Refurbish if damage is detected in the inspection process and is repairable or handle is replaceable
  4. Dispose of item if cutting edge is severely damaged, rake fingers are cracked or missing, or handle base is cracked or damaged.

Refurbishing Procedures

A. Cleaning and Repair

  1. Head
    1. Remove dirt, rust and grime from head with wire brush or hose.
    2. Square up blade if necessary.
    3. Sharpen cutting edge 1/8-inch wide at 50° angle. Ensure that blade corners are square.
    4. Check large nut on head and tighten or replace as needed.   Sharply strike rivet to tighten head to handle as needed.
    5. Apply rust inhibitor to tool head.  Local cache option for painting tool head.    Black paint only.
    6. Replace as necessary.
  2. Handle
    1. Sand handle if it is chipped, dinged, rough or has tape residue. 
    2. Wipe handle with linseed oil after sanding.

B. Test for Performance

  1. Ensure tool is properly sharpened with no deficiency to materials or craftsmanship.
  2. Ensure head and handle are properly attached with no play caused by a loose head or handle.

C. Repackaging

  1. Install plastic sheath NFES #001854.
  2. Package 10 each in NFES #000305 carton (56” x 20” x 11”).

 

NWCG Latest Announcements

NWCG Training Catalog now on Wildland Fire Learning Portal

Date: April 25, 2023
Contact: NWCG Training  

The National Wildfire Coordinating Group (NWCG) has migrated the training catalog from the NWCG website to the Wildland Fire Learning Portal (WFLP) as part of our ongoing efforts to streamline processes and improve efficiency. To facilitate this transition, the training catalog remains available on www.nwcg.gov through April 2024.

Starting May 2024, the training catalog will no longer be accessible on www.nwcg.gov. However, you can still access the complete training catalog by logging in as a guest to the WFLP.

References:

Wildland Fire Learning Portal

 

NWCG Website Migration

Date: April 01, 2024
Contact: NWCG Webmaster

The National Wildfire Coordinating Group is thrilled to announce a significant upgrade to https://www.nwcg.gov, involving a comprehensive redesign of over 7,000 web pages. This enhancement is focused on improving user experience. The migration to the new NWCG website will commence on April 2, 2024, starting at noon EST and is expected to take a few hours. 

During the migration period, as the www.nwcg.gov domain-name-location updates across the Internet, you might encounter either the current or the new site depending on your location. We request your patience during this transition. If you are not redirected to the new site by April 3, 2024, we recommend clearing your browser’s cache and refreshing the page.

Please note that while navigating the revamped website, there may be instances of broken links or errors. Our dedicated web migration team has made significant efforts to minimize such issues prior to launch and will promptly address any that arise via use of analytic reports. We value your patience and understanding as we work towards enhancing your overall website experience.

WFSTAR 2023 Year in Review and 2024 Core Component Module Packages Available

Date: March 6, 2024
Contact: Joe Schindel 

The 2023 Fire Year in Review module and 2024 Core Component Module Packages for RT-130, Wildland Fire Safety Training Annual Refresher (WFSTAR) are now available on the NWCG website. The 2024 Core Component Module Package provides all content needed to deliver RT-130.

 

References:

WFSTAR 2023 Fire Year in Review module

WFSTAR 2024 Core Component Module Packages

2024 NWCG Executive Board Annual Letter

Date: March 6, 2024
Contact: NWCG

The NWCG Executive Board is privileged to share with you the 2024 NWCG Executive Board Annual Letter. As we look into the future and navigate an incredibly complex and dynamic environment, we must remain focused on our mission while actively engaging in national conversations regarding numerous wildland fire initiatives. In 2024, we prioritize building upon our successes and committing to continuous improvement. Key priorities and considerations for this year include: 

  • Determining Core Workload
  • Ensuring Incident Performance and Training Modernization (IPTM) Success
  • Improving Efficiencies
  • Firefighter Health and Wellness
  • Engagement in National Conversations

Together we will continue to make significant strides in the challenging and vital work that lies ahead. 

 

References:

2024 NWCG Executive Board Annual Letter