Skip to main content

Axe – Boy's Single Bit, 24" Handle, w/Sheath

NFES #:
000352
Category:
Tools
Updated:
Storage and Shelf Life Checks:
None

Initial Inspection/Disposal Criteria

  1. Inspect for obvious damage to head, cutting edges.
  2. Inspect for large chips in blade or cracked head eye.
  3. Inspect for any modifications to head, such as rivets through side of head to hold handle.
  4. Inspect handle for twisted, bent or open grain, if handle has been shortened or is non-standard.
  5. Return to stock if item shows no signs of use and passes visual inspection.
  6.  Refurbish if damage detected in the inspection process is repairable or handle is replaceable.
  7. Dispose of item if unable to repair.

Refurbishing Procedure

A. Cleaning

  1. Wash head and handle.
  2. Wipe dry

B. Repair

  1. Head
    •  Sharpen tool to specifications according to tool sharpening gauge NFES# 000510.
    • Tools should never be ground to the degree that the metal temperature raises high enough to remove temper, i.e. blue or burned edges.
    • Ensure that blade corners are square.
    • Paint tool head with rust inhibitor (cache option.)
  2. Handle
    • Sand handle if it is rough, chipped, dinged, or has any type of residue that did not come off during sanding.
    • When replacing handle, shape eye for a snug fit. Use high impact plastic or wood-type wedges with appropriate type of epoxy. Metal wedges can be added only in the field as an emergency measure and should not be used during refurbishment.
    • The bottom of the tool head should be within ⅜”--⅝” of the shoulder of the handle.
    • Cut excess off handle make flush with tool head after inserting wedge into handle.
    • Wipe handle with rag and linseed oil.

C. Tests for Performance

  1. On the head check that blades have not been tapered or rounded to the point that tools cannot be sharpened.
  2. On the handle check that it is not twisted, bent or is open-grain.
  3. Grasp the handle of the tool 2- 4” from the end with the head hanging down, but not touching the ground. Using a ball peen or similar hammer give the end of the handle a firm smack. Listen to the sound it makes. If the head is tight and the handle is free of defects, it will make a clear ringing sound. If it is loose or defective you will hear a dull thud, like hitting the end of a 2 x 4.

D. Repackaging

  1. For NFES #000707 install sheath (no NFES)
    • Package 12 each in NFES #000338 carton (37” x 18” x 7”).
  2. For NFES #000352 install leather sheath NFES #000359, package per local cache requirements
  3. For NFES #000383 install sheath NFES #000815
    • Suggested packaging is 6 each in NFES #000385 carton (7.25” x 9.25” x 26”).

 

NWCG Latest Announcements

NWCG Training Catalog now on Wildland Fire Learning Portal

Date: April 25, 2023
Contact: NWCG Training  

The National Wildfire Coordinating Group (NWCG) has migrated the training catalog from the NWCG website to the Wildland Fire Learning Portal (WFLP) as part of our ongoing efforts to streamline processes and improve efficiency. To facilitate this transition, the training catalog remains available on www.nwcg.gov through April 2024.

Starting May 2024, the training catalog will no longer be accessible on www.nwcg.gov. However, you can still access the complete training catalog by logging in as a guest to the WFLP.

References:

Wildland Fire Learning Portal

 

NWCG Website Migration

Date: April 01, 2024
Contact: NWCG Webmaster

The National Wildfire Coordinating Group is thrilled to announce a significant upgrade to https://www.nwcg.gov, involving a comprehensive redesign of over 7,000 web pages. This enhancement is focused on improving user experience. The migration to the new NWCG website will commence on April 2, 2024, starting at noon EST and is expected to take a few hours. 

During the migration period, as the www.nwcg.gov domain-name-location updates across the Internet, you might encounter either the current or the new site depending on your location. We request your patience during this transition. If you are not redirected to the new site by April 3, 2024, we recommend clearing your browser’s cache and refreshing the page.

Please note that while navigating the revamped website, there may be instances of broken links or errors. Our dedicated web migration team has made significant efforts to minimize such issues prior to launch and will promptly address any that arise via use of analytic reports. We value your patience and understanding as we work towards enhancing your overall website experience.

WFSTAR 2023 Year in Review and 2024 Core Component Module Packages Available

Date: March 6, 2024
Contact: Joe Schindel 

The 2023 Fire Year in Review module and 2024 Core Component Module Packages for RT-130, Wildland Fire Safety Training Annual Refresher (WFSTAR) are now available on the NWCG website. The 2024 Core Component Module Package provides all content needed to deliver RT-130.

 

References:

WFSTAR 2023 Fire Year in Review module

WFSTAR 2024 Core Component Module Packages

2024 NWCG Executive Board Annual Letter

Date: March 6, 2024
Contact: NWCG

The NWCG Executive Board is privileged to share with you the 2024 NWCG Executive Board Annual Letter. As we look into the future and navigate an incredibly complex and dynamic environment, we must remain focused on our mission while actively engaging in national conversations regarding numerous wildland fire initiatives. In 2024, we prioritize building upon our successes and committing to continuous improvement. Key priorities and considerations for this year include: 

  • Determining Core Workload
  • Ensuring Incident Performance and Training Modernization (IPTM) Success
  • Improving Efficiencies
  • Firefighter Health and Wellness
  • Engagement in National Conversations

Together we will continue to make significant strides in the challenging and vital work that lies ahead. 

 

References:

2024 NWCG Executive Board Annual Letter