Skip to main content

PMS 448

PMS 448

PMS 448

Introduction

COVID-19 Refurb Guidelines

References

All Content

Aviation

Camp

Clothing

Cordura

Fuel Handling

Kits

Medical

Miscellaneous

PPE

Small Engine Equipment

Tools

Water Handling

Deleted Items

Pack – Personal Gear, M-2014

NFES #
000679
Category
Cordura
Updated
Storage and Shelf Life Checks
None

Initial Inspection/Disposal Criteria

  1. Visually inspect fabric for cuts, tears, burns, and areas of abrasions. Inspect seams for breaks in stitching and for areas where the fabric is unraveling into the seams, check all straps and webbing for cuts or excessive wear.  Ensure straps are securely attached to the fabric; inspect zippers for broken coils and missing or broken sliders.  Ensure they are securely attached to the fabric. Open and close the zippers to ensure a smooth and proper function.  Ensure all hardware, buckles and Velcro closures are correctly attached.  Inspect all buckles and hardware for cracks or breaks.  Fasten and unfasten all buckles and hardware to ensure a smooth and proper function. Ensure all Velcro closures are securely attached. 
  2. Return to stock if item is clean, free of damage, and in unused condition.
  3. Refurbish if item passes inspection, and repair is economically feasible.
  4. Dispose of if there’s any indelible writing or markings on the item, or if item is beyond economical repair.

Refurbishment Procedures

A. Cleaning

  • ​CLASS 1 CORDURA (MACHINE WASH OK)
    • Allow any mud or loose dirt to dry then remove using a stiff-bristle brush. If stains remain, wash as recommended below.
    • Remove light oil and dirt stains by brushing with a solution of warm water and a mild detergent, rinse thoroughly, and hang to dry.  “Mild detergents” includes most home laundry detergents that contain no chlorine bleach or added scents.
    • For heavier oil or grease, soak in water-soluble biodegradable degreaser for at least 30 minutes, brush with a bristle brush, rinse thoroughly, and hang to dry.
    • If machine washing, use only cold water on a gentle cycle and air dry.
    • Where no other method is cleaning the fabric, wash with pressure washer set at wide fan, warm water, and only allow nozzle close enough as necessary for cleaning, the further away the better for the fabric.

DO NOT MACHINE DRY.  DO NOT USE BLEACH TO CLEAN FABRIC.

B. Repair

  1. If necessary, replace buckles and hardware.
  2. Repair any tears, holes or areas of excessive abrasion if economically feasible.
  3. Repair any seams that are worn or that have torn loose.
  4. Repair or replace webbing.

C. Test for performance

  • Test any buckles, zippers or Velcro that has been replaced for functionality.

D. Repackaging

  1. For NFES #000674, insert 2 blue canteen case and blue stuff sack into main compartment. Close all buckles, secure the shoulder yoke. Pack 10 packs per box.
  2. For NFES #001855, pack 10 packs per NFES #002030 carton (24” x 16” x 12”).
  3. For NFES #000744, pack 20 per local cache carton preference.

 

Print PDF

NWCG Latest Announcements

2025-2026 Wildland Fire Leadership Campaign: "Leadership Levels" Now Available

Date: October 15, 2025
Questions? Please contact:
Leadership Committee

NWCG is excited to announce the release of the Leadership Committee’s 2025–2026 Leadership Campaign, themed “Leadership Levels.” This annual initiative offers all students of leadership and wildland fire management an opportunity to engage with essential leadership skills and knowledge needed to lead effectively in dynamic environments.

The campaign is structured into four quarters and may be completed at any time between October 1, 2025 -December 31, 2026. Leadership levels will be released quarterly.

Quarter One materials are now available on the Wildland Fire Leadership Development Program website and focus on Leadership Level 1, Follower (Self-Leadership).

References:

2025/2026 NWCG Leadership Campaign - Leadership Levels

Wildland Fire Leadership Development Program

Leadership Committee

Updated! L-280, Followership to Leadership (Instructor-led) Course

Date: October 3, 2024
Questions? Please contact:
Leadership Committee

NWCG is pleased to announce the updated L-280, Followership to Leadership (Instructor-led) course is now available. L-280 is intended for operational personnel at the Firefighter Type 1 level, and for individuals pursuing Leadership Level 2, New Leader. 

This instructor-led course is a primer on leadership and the second formal course in the Wildland Fire Leadership Development Program. It helps emerging leaders build the confidence, skills, and mindset needed to lead effectively in high-risk environments. 

For more information about leadership development and available courses, visit the Leadership Committee Web Portal.

References:

L-280, Followership to Leadership (Instructor-led)

Wildland Fire Leadership Development Program

Wildland Fire Learning Portal

Equipment Advisory 25-01: Pre-2006 Fire Shelter Degradation and Discontinuation of Use

Date: Sept 26, 2025
Questions? Please contact:
Equipment Technology Committee 

The Equipment Technology Committee (ETC) has released Equipment Advisory 25-01: Pre-2006 Fire Shelter Degradation and Discontinuation of Use. This advisory recommends all pre-2006 fire shelters should be removed from service by January 1, 2026.

This advisory recommends firefighters and fire managers to:

  • Inspect fire shelters immediately
  • Replace and destroy any pre-2006 shelters (identified by white or pink insert label)
  • Order replacements as needed

For further details, please refer to the complete advisory. 

References:

Equipment Advisory 25-01: Pre-2006 Fire Shelter Degradation and Discontinuation of Use

NWCG Fire Inspection Flowchart, PMS 411-1

NWCG Alerts

NEW! S-219, Firing Operations (Blended) Now Available

Date: Sept 11, 2025
Questions? Please contact:
Fuels Management Committee 

The S-219, Firing Operations (Blended) course is now available on the Wildland Fire Learning Portal. Developed through the Incident Performance and Training Modernization (IPTM) effort, this training supports individuals working towards Firing Boss, Single Resource (FIRB) incident qualifications.

This blended course combines online and instructor-led training to provide students with the knowledge and skills required to perform the duties of the FIRB, as described in the NWCG Incident Position Standards for Firing Boss, Single Resource, PMS 350-105.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1, scheduled for January 2026.

References:

S-219, Firing Operations (Blended)

NWCG Firing Boss, Single Resource Position Page

Wildland Fire Learning Portal