Skip to main content

Pump – Portable, Lightweight, 4 Cycle

NFES #
006000
Category
Small Engine Equipment
Updated
Storage and Shelf Life Checks
Yes
Storage and Shelf Life Procedure
Date Last Tested (DLT) not to exceed 12 months.

Initial Inspection/Disposal Criteria

  1. Visually inspect for evidence of use (dust, oil, starter seal broken), damage or missing parts.
  2. Return to stock if there is no sign of use or damage and date last tested (DLT) does not exceed 12 months.
  3. Refurbish as necessary if unit has been used or fueled, damaged, or shelf life is exceeded.
  4. Dispose of the unit if it is not economically repairable.

Refurbishment Procedures

A. Cleaning

  1. Remove dirt and oil, using detergent or degreaser as necessary.
  2. Use pressure washer to remove heavy deposits of oil and grease.
  3. Equipment should be serviced and test run as quickly as possible after pressure washing to minimize rust formation on metal parts.

B. Repair

  1. Check for loose and/or missing parts or mounting hardware; tighten or replace as needed.
  2. Check condition of engine oil, spark plug, air filter, and fuel filter; clean or replace as needed.
  3. Inspect power-head (engine) for freeness of all moving parts, ensuring that the crankshaft, piston/cylinder and all engine bearings are not damaged.
  4. Inspect exhaust system; make sure there are no cracks or leaks. Clean spark arrestor of excess carbon build-up, replace screen if damaged.
  5. Ensure all decals (operations and warning) are affixed and legible.
  6. Check to make sure that all gaskets on the pump fittings/adapters are in place and functioning properly.

C. Test for Performance

  1. Refer to the owner’s manual for operations and specifications information specific to pump model. 
  2. Ensure fuel is fresh for running tests.
  3. Ensure recoil starter functions properly. Check for damage or fraying of pull cord; repair or replace as necessary.
  4. Ensure pump packing or mechanical seal is not leaking, repair or replace as necessary.
  5. Should any function fail a test, refer to the manufacturer’s repair manual and troubleshooting guide to correct the problem.
  6. Remove all gasoline from fuel tank and run engine until carburetor is completely empty of gas.
  7. Remove all water from pump end. Grease pump as necessary.

D. Repackaging

  1. Use nylon “zip-tie” to tie off (seal) starter rope to the frame.
  2. Attach certification tag; that indicates date last tested (DLT), property #, and name of individual certifying performance.
  3. Ensure that all identification (property #, serial #, owner ID) is affixed and legible.

 

NWCG Latest Announcements

NEW! Incident Performance and Training Modernization Story Map Now Available

Date: Aug 26, 2025
Questions? Please contact:
National Wildfire Coordinating Group

NWCG is excited to announce the launch of the Incident Performance and Training Modernization (IPTM) Story Map, a new interactive resource that showcases how NWCG is transforming wildland fire training and qualifications through a performance-based system.

Since its launch in 2023, IPTM has made major strides in updating how we manage incident positions:

  • 36 incident positions now have new Incident Position Standards and Next Generation Position Task Books available for field use
  • 6 more incident positions are nearing completion
  • 111 total incident positions are being analyzed through the IPTM initiative

The Story Map guides you through the IPTM process, highlights key accomplishments, and outlines what’s ahead. Whether you are a trainer or a trainee, this tool offers valuable insight into the modernization effort shaping the future of wildland fire training and qualifications.

This effort would not be possible without the contributions of NWCG staff, NWCG committees, and hundreds of subject matter experts across the wildland fire community.

References:

IPTM Story Map

Incident Performance and Training Modernization Webpage

NEW! S-290, Intermediate Wildland Fire Behavior (Blended) Available Now

Date: Aug 15, 2025
Questions? Please contact:
Fire Behavior Subcommittee

NWCG is excited to announce that the S-290, Intermediate Wildland Fire Behavior (Blended) training is now available on the Wildland Fire Learning Portal. S-290 (Blended) training combines online training and instructor-led training components that support individuals working towards any Single Resource Boss or Fire Effects Monitor incident qualifications.

This second course in the series collectively serves to develop fire behavior prediction knowledge and skills, and provides more detailed information on fuels, weather, and topography that affect wildland fire behavior for safety purposes.

Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-290, Intermediate Wildland Fire Behavior (Blended).

References:

S-290, Intermediate Wildland Fire Behavior (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

NEW! S-271, Helicopter Crewmember (Blended) Now Available

Date: Aug 14, 2025
Questions? Please contact:
Interagency Helicopter Operations Subcommittee

The S-271, Helicopter Crewmember (Blended) is now available. Developed through the Incident Performance and Training Modernization (IPTM) effort, this training supports individuals working towards Helicopter Crewmember (HECM) incident qualifications. 

S-271, Helicopter Crewmember (Blended) training combines online training and instructor-led training components. This course is designed to provide students with the knowledge and skills necessary to perform the duties of the HECM position, as described in the NWCG Incident Position Standards for Helicopter Crewmember, PMS 350-22.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1, scheduled for January 2026.

References:

S-271, Helicopter Crewmember (Blended)

NWCG Helicopter Crewmember (HECM) Position Page

Wildland Fire Learning Portal

Incident Position Standards and Next Generation Position Task Books Now Available for FBAN and LTAN

Date: Aug 13, 2025
Questions? Please contact:
Fire Behavior Subcommittee

NWCG is excited to announce that Incident Position Standards and Next Generation Position Task Books are now available for Fire Behavior Analyst (FBAN) and Long Term Fire Analyst (LTAN).

The Performance Support Packages for these positions were developed as part of the Incident Performance and Training Modernization (IPTM) effort. These resources support trainees, qualified personnel, and evaluators in their respective roles.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1, scheduled for January 2026.

References:

NWCG Fire Behavior Analyst Position Page

NWCG Long Term Fire Analyst Page