Skip to main content

Interagency Fire Unmanned Aircraft Systems Subcommittee

Banner Image
IFUASS header graphic. Photo of a drone flying through dense smoke. Inset photos of female firefighter standing at a UAS helipad, and the other of a UAS specialist sitting in front of a bank of computer screens reading data. Decorative.
Mission Statement

Mission Statement

The Interagency Fire Unmanned Aircraft Systems Subcommittee (IFUASS) provides national leadership to develop and disseminate guidance on the use of Unmanned Aircraft Systems (UAS) in wildland fire management operations.

Body

Primary Objectives

UAS specialist monitoring data on handheld device.

  • Enable safe, effective and efficient UAS operations in the wildland fire management environment by developing and disseminating comprehensive wildland fire related UAS guidance. Include standards for UAS utilization, performance, risk management, qualifications, training, and equipment.
  • Provide coordinated and unified UAS subject matter expertise to NIAC and the NWCG member agencies.
  • Serve as a focal point for interagency wildland fire UAS operational initiatives, proposals, and issues.
  • Identify and evaluate UAS related problems; develop and propose solutions.
  • Solicit input from operations and management personnel on UAS related issues.

Guidance Documents

NWCG

DOI

FAA

Other

Incident Toolbox

Coordinator

The Interagency UAS coordinator is available to answer questions, provide guidance, and assist with UAS ordering.  For inquiries about day-to-day operations and training, please call 208-387-5335.  More information is available at the NIFC UAS website.

Operations

Operations information is available at the NIFC UAS website including:

Aerial Ignition

UAS aerial ignition is approved for interagency use in support of wildland fire (wildfire and prescribed fire).

  • UAS aerial Ignition is conducted by authorized agency personnel in accordance with DOI, USFS, OAS, and NWCG policy/standards.
  • UAS agency aerial ignition personnel possess the UASP or UASP (T) qualification in IQCS/IROC.  They are also carded to operate the aerial ignition payload by OAS.
  • UAS aerial ignition personnel work for the FIRB or designee.
  • UAS utilized for aerial ignition are carded by OAS.
  • UAS aerial ignition payloads are developed through the IFUAS Subcommittee and Aerial Ignition Unit.
  • UAS aerial ignition is ordered through established dispatch process.  A typical order is two UASP.  Special Needs:  Aerial Ignition qualified personnel equipped with M600/Ignis 2 and kit.

CONTACT - the UAS Coordinator (fire) to discuss UAS Aerial Ignition or the ordering process. 208-387-5335.

References

Job Aids

Program Updates

Current UAS Fire Mission/Data Examples are available on the NIFC UAS website.

Systems and Availability

Current systems information is available on the NIFC UAS website.

Training

The UAS Training Unit exists to serve the training and workforce development needs of the wildland fire UAS community.  When available, information on training courses will located on the Wildland Fire Learning Portal.

References

 

UAS Guide Terms and Abbreviations 

UAS Intrusion Protocol (pages 20-22)

Chair: Jager, Justin

NWCG Coordinator: Schultz, Dave

Parent Committee: National Interagency Aviation Committee

Meeting Schedule:

TBD

Page Last Modified or Reviewed:

NWCG Latest Announcements

NEW! S-290, Intermediate Wildland Fire Behavior (Blended) Available Now

Date: Aug 15, 2025
Questions? Please contact:
Fuels Management Committee

NWCG is excited to announce that the S-290, Intermediate Wildland Fire Behavior (Blended) training is now available on the Wildland Fire Learning Portal. S-290 (Blended) training combines online training and instructor-led training components that support individuals working towards any Single Resource Boss or Fire Effects Monitor incident qualifications.

This second course in the series collectively serves to develop fire behavior prediction knowledge and skills, and provides more detailed information on fuels, weather, and topography that affect wildland fire behavior for safety purposes.

Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-290, Intermediate Wildland Fire Behavior (Blended).

References:

S-290, Intermediate Wildland Fire Behavior (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

NEW! S-271, Helicopter Crewmember (Blended) Now Available

Date: Aug 14, 2025
Questions? Please contact:
Interagency Helicopter Operations Subcommittee

The S-271, Helicopter Crewmember (Blended) is now available. Developed through the Incident Performance and Training Modernization (IPTM) effort, this training supports individuals working towards Helicopter Crewmember (HECM) incident qualifications. 

S-271, Helicopter Crewmember (Blended) training combines online training and instructor-led training components. This course is designed to provide students with the knowledge and skills necessary to perform the duties of the HECM position, as described in the NWCG Incident Position Standards for Helicopter Crewmember, PMS 350-22.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1, scheduled for January 2026.

References:

S-271, Helicopter Crewmember (Blended)

NWCG Helicopter Crewmember (HECM) Position Page

Wildland Fire Learning Portal

Incident Position Standards and Next Generation Position Task Books Now Available for FBAN and LTAN

Date: Aug 13, 2025
Questions? Please contact:
Fire Behavior Subcommittee

NWCG is excited to announce that Incident Position Standards and Next Generation Position Task Books are now available for Fire Behavior Analyst (FBAN) and Long Term Fire Analyst (LTAN).

The Performance Support Packages for these positions were developed as part of the Incident Performance and Training Modernization (IPTM) effort. These resources support trainees, qualified personnel, and evaluators in their respective roles.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1, scheduled for January 2026.

References:

NWCG Fire Behavior Analyst Position Page

NWCG Long Term Fire Analyst Page

ETC/RMC Safety Bulletin: 25-001 New Guidance on Laundering Wildland Fire Clothing to Reduce Contamination

Date: Aug 8, 2025
Questions? Please contact:
Equipment Technology Committee
 Risk Management Committee

The Equipment Technology Committee (ETC) and the Risk Management Committee (RMC) have issued Safety Bulletin 25-001: Laundering to Decontaminate Wildland Fire Clothing. Recent research revealed that wildland fire flame-resistant pants and shirts can be contaminated with chemicals from combustion byproducts, including carcinogens, and that common laundering practices can effectively remove these harmful contaminants from wildland firefighter clothing more effectively than previously understood. It is recommended to decontaminate wildland fire clothing as frequently as possible. 

Frequently Asked Questions about this new information and how to implement recommendations can be found on the NWCG Alerts page. Read the complete ETC/RMC Safety Bulletin: 25-001 to learn more. 

References:

NWCG Alerts

ETC Safety Bulletin: 25-001

Frequently Asked Questions (FAQ) on Laundering to Decontaminate Wildland Fire Clothing

Equipment Technology Committee

Risk Management Committee