Skip to main content

PMS 448

PMS 448

Introduction

COVID-19 Refurb Guidelines

References

All Categories

Aviation

Camp

Clothing

Cordura

Fuel Handling

Kits

Medical

Miscellaneous

PPE

Small Engine Equipment

Tools

Water Handling

Deleted Items

Valve – Pressure Relief, 1 1/2” NH-F

NFES #
000229
Category
Water Handling
Updated
Storage and Shelf Life Checks
None

Initial Inspection/Disposal Criteria

  1. Inspect for damage to threads, missing or damaged parts, and missing or damaged handles.
  2. Return to stock if item is clean, passes inspection and is in unused condition.
  3. Refurbish if cleaning is required or deficiencies are discovered in the inspection process.
  4. Dispose of item if it is damaged beyond repair or has damage caused by fire exposure or fails Testing for Performance and cannot be repaired.

Refurbishing Procedures

A. Cleaning

  1. Wash with water and mild detergent. Brush if necessary.
  2. Rinse thoroughly and stand upright to dry.

B. Repair

  • Replace missing or damaged handle.

C. Testing for performance

  1. Pressure testing.
    1. Install valve on test pump.
    2. Close handle.
    3. Attach cap or nozzle for testing.
    4. Test for leaks at 300 PSI.
    5. Inspect for leaks around female coupling.
    6. Inspect for leaks under top of handle shaft.
    7. Inspect for leaks on bottom end of handle shaft.
    8. Inspect for leaks in casing.
  2. Retest after repairs are made.

D. Repackaging

  1. Ensure item is completely dry before packaging.
  2. 10 EA in NFES #008105 carton (12” x 12” x 8”).

 

Reference

Water Handling Equipment Guide, PMS 447-1 

 

Share on Social Media

Print PDF

NWCG Latest Announcements

2025/2026 Leadership Campaign Quarter 2 Now Available!

Date: February 13, 2026
Questions? 
Please contact: Leadership Committee

NWCG is excited to announce that the Quarter Two materials for the 2025/2026 Wildland Fire Leadership Campaign are now available! This annual initiative invites all leadership and wildland fire management students to engage with essential skills and knowledge needed to lead effectively in dynamic environments.

This quarter focuses on Leadership Level 2: New Leader (Conveying Intent). Conveying intent is a crucial leadership competency in the high-risk, dynamic environment of wildland firefighting. Months 4 - 6 will concentrate on how successfully conveying intent enhances situational awareness, promotes shared understanding, and empowers firefighters to exercise initiative and adapt to changing conditions.

References:

2025/2026 NWCG Leadership Campaign - Leadership Levels

Wildland Fire Leadership Development Program

Leadership Committee

Opportunity to Serve the Wildland Fire Community as an IPTM SME!

Date: February 10, 2026
Questions? 
Please contact: NWCG SME Specialist

NWCG is seeking experienced wildland firefighters and support personnel to serve as Subject Matter Experts (SMEs) for the Incident Performance and Training Modernization (IPTM) initiative. The intent of IPTM is to transition NWCG’s training and qualification system to a performance-based model through updated position descriptions, Incident Position Standards, Next Generation Position Task Books (Next Gen PTBs), and updates to training where needed.

NWCG is currently recruiting SMEs for the following positions:

  • Aircraft Timekeeper (ATIM)
  • Compensation/Claims Unit Leader (COMP)
  • Cost Unit Leader (COST)
  • Crew Representative (CREP)
  • Deck Coordinator (DECK)
  • Fire Effects Monitor (FEMO)
  • Field Observer (FOBS)
  • Geographic Information System Specialist (GISS)
  • Ordering Manager (ORDM)
  • Receiving/Distribution Manager (RCDM)
  • Staging Area Manager (STAM)

Projects begin April/May 2026 and require 15–20 hours per month for 6–8 months, including a five-day workshop in Boise, Idaho this May. Apply by February 27, 2026, at the link below and review the attached document for details.

References:

NWCG SME Interest Sign-up

IPTM Subject Matter Expert Duties and Expectations Document

Incident Performance and Training Modernization (IPTM)

NEW! M-280, Resource Advisor, Fireline (Instructor-Led) Course Available Now

Date: January 29, 2026
Questions? 
Please contact: Resource Advisor Subcommittee

NWCG is pleased to announce the new M-280, Resource Advisor, Fireline (Instructor-Led) course is now available. This training supports individuals working towards Resource Advisor, Fireline (REAF) incident qualifications.

M-280, Resource Advisor, Fireline (Instructor-Led) training prepares students to serve as a Resource Advisor, Fireline (REAF) as defined in NWCG Incident Position Standards for Resource Advisor, Fireline, PMS 350-112. This course presents scenarios that reflect the diverse challenges a REAF may encounter during an incident. Through these scenarios, participants gain hands-on experience and an understanding of REAF responsibilities in a controlled learning environment.

References:

Resource Advisor, Fireline Position Page

NWCG Position Standards for Resource Advisor, Fireline, PMS 350-112

M-280, Resource Advisor, Fireline (Instructor-Led)

Wildland Fire Learning Portal

2026 Updates to the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1

Date: January 23, 2026
Questions? 
Please contact: Incident and Position Standards Committee

The Incident and Position Standards Committee has updated the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1.

These updates address changes to incident position names and requirements for qualification, training, and experience. Updates related to the implementation of Complex Incident Management (CIM) and Incident Performance Training Modernization (IPTM) are also included.

The NWCG Wildland Fire Position Qualification Flowchart, PMS 308 has also been updated to reflect the recent changes.

References:

NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1

NWCG Wildland Fire Position Qualification Flowchart, PMS 308

IPSC Memo 26-01: January 2026 Updates to the NWCG Standards for Wildland Fire Positions Qualifications, PMS 310-1