Skip to main content

Stand 3 - Pulaski Trail

Submitted by Anonymous (not verified) on

August is the driest month on record since 1894. Ranger Ed Pulaski oversees close to 200 men assisted by three forest guards. The fire crews and Guards are spread out over a distance of about 10 miles fighting numerous small fires between Wallace and Avery. On August 20, Pulaski is returning to his crews after briefing Forest Supervisor Weigle in Wallace. The Palouse winds hit the area in the early afternoon. Pulaski rides up and down the ridgeline where the men have been working and gathers loose groups of firefighters, eventually totaling around 45 to 50 men.

By mid-afternoon, Pulaski leads this group off Striped Peak and down the West Fork of Placer Creek making for the town of Wallace. Upon reaching an old cabin, Pulaski stages his men and scouts ahead to find out they are cut-off down drainage by fire. He retreats up the canyon and seeks the Nicholson adit (an exploratory mining tunnel) for a place to take shelter.

Throughout the afternoon and into the evening, similar scenarios take place as mostly young and inexperienced crew supervisors are faced with difficult decisions on how to escape and take shelter from the impending firestorm. A variety of differing techniques are utilized: from sheltering in place using natural features to lighting escape fires.

View of the parking at the trailhead

Note limited parking available at the trailhead. Trail begins across the road.

Interpretive displays

Several interpretive displays are located at the parking area and along the trail leading to Stand 4.

 
Location (SRS)
POINT (-115.9336111 47.4588889)
Related Stand
Staff Ride to the 1910 Idaho Fire

NWCG Latest Announcements

ETC Equipment Bulletin: 25-003 Flame-Resistant Shirt Survey

Date: June 12, 2025
Questions?  Please contact:
Equipment Technology Committee

The U.S. Forest Service National Technology and Development Program (NTDP) is seeking input on the Forest Service-designed flame-resistant (FR) shirt, currently available through the National Interagency Support Cache system and FedMall.

NTDP is conducting a product review to improve future FR shirt designs. As part of this effort, a short survey is now open for federal employees who have worn any of three recent FR shirt models. Feedback will guide design improvements to better meet the needs of wildland firefighters.

To comply with the Paperwork Reduction Act, responses are limited to federal employees. The survey is open through September 12, 2025. 

References:

NWCG Alerts

ETC Equipment Bulletin: 25-003

NEW! S-130, Firefighter Training (Blended) Now Available

Date: June 10, 2025
If you have questions, please visit our FAQ page. 
If your question is not answered there, you can 
submit your question using our Contact Us form. 
 

The S-130, Firefighter Training (Blended), equips new wildland firefighters with essential skills through a mix of online learning and hands-on training. The course features a required online component and an instructor-led exercise, reinforcing online concepts with practical performance-based training.

The course builds competencies in wildland fire operations, safety, and equipment use, applicable across various operational environments. Both the online component and instructor-led field exercise must be completed to receive a certificate of completion. Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-130, Firefighter Training (Blended).

References:

S-130, Firefighter Training (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002