Skip to main content

Jurisdictional Unit Polygon

Submitted by Anonymous (not verified) on

This geospatial layer depicts areas of wildland fire jurisdiction to the National Wildfire Coordinating Group (NWCG) Unit level. Jurisdictional Unit is defined by NWCG as "The governmental entity having overall land and resource management responsibility for a specific geographical area as provided by law."

Wildland Fire Perimeters Polygon

Submitted by Anonymous (not verified) on

Wildland Fire Perimeter Polygons geospatial data layer standard provides the standard template for exchange/transfer of wildland fire perimeter polygons, representing the daily and final perimeters for wildfires and prescribed fires. Replaces the Fire History (polygons) geospatial data layer standard (archived) and incorporates the Daily Fire Perimeter geospatial data layer standard

Wildland Fire Locations Point

Submitted by Anonymous (not verified) on

Wildland Fire Location Points represent the final spatial locations of the fire occurrences. Fire occurrences represent the ignition points (preferred), the polygon centroids, or more generalized locations (least desirable) when the ignition points are not known or not available.

Wildland Fire Event Line

Submitted by Anonymous (not verified) on

The Wildland Fire Event Line data standard will define the minimum attributes necessary for collection, storage and dissemination of incident based data on wildland fires (wildfires and prescribed fires). The standard is not intended for long term data storage, rather a standard to assist in the creation of incident based data management tools, minimum standards for data exchange, and to assist users in meeting NWCG Standards for Geospatial Operations, PMS 936, guidance on incidents.

Wildland Fire Event Line (Dev)

Submitted by Anonymous (not verified) on

The Wildland Fire Event Line data standard will define the minimum attributes necessary for collection, storage and dissemination of incident based data on wildland fires (wildfires and prescribed fires). The standard is not intended for long term data storage, rather a standard to assist in the creation of incident based data management tools, minimum standards for data exchange, and to assist users in meeting NWCG Standards for Geospatial Operations, PMS 936, guidance on incidents.

Wildland Fire Event Point

Submitted by Anonymous (not verified) on

The Wildland Fire Event Point data standard will define the minimum attributes necessary for collection, storage and dissemination of incident based data on wildland fires (wildfires and prescribed fires). The standard is not intended for long term data storage, rather a standard to assist in the creation of incident based data management tools, minimum standards for data exchange, and to assist users in meeting NWCG Standards for Geospatial Operations, PMS 936, guidance on incidents.

Subscribe to

NWCG Latest Announcements

ETC Equipment Bulletin: 25-003 Flame-Resistant Shirt Survey

Date: June 12, 2025
Questions?  Please contact:
Equipment Technology Committee

The U.S. Forest Service National Technology and Development Program (NTDP) is seeking input on the Forest Service-designed flame-resistant (FR) shirt, currently available through the National Interagency Support Cache system and FedMall.

NTDP is conducting a product review to improve future FR shirt designs. As part of this effort, a short survey is now open for federal employees who have worn any of three recent FR shirt models. Feedback will guide design improvements to better meet the needs of wildland firefighters.

To comply with the Paperwork Reduction Act, responses are limited to federal employees. The survey is open through September 12, 2025. 

References:

NWCG Alerts

ETC Equipment Bulletin: 25-003

NEW! S-130, Firefighter Training (Blended) Now Available

Date: June 10, 2025
If you have questions, please visit our FAQ page. 
If your question is not answered there, you can 
submit your question using our Contact Us form. 
 

The S-130, Firefighter Training (Blended), equips new wildland firefighters with essential skills through a mix of online learning and hands-on training. The course features a required online component and an instructor-led exercise, reinforcing online concepts with practical performance-based training.

The course builds competencies in wildland fire operations, safety, and equipment use, applicable across various operational environments. Both the online component and instructor-led field exercise must be completed to receive a certificate of completion. Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-130, Firefighter Training (Blended).

References:

S-130, Firefighter Training (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002