Skip to main content

2025 WOR: Frog Fire Entrapment – July 30, 2015

six minutes for safety logo

Incident Summary:

On the evening of July 30, 2015, 38-year-old Engine Captain, David “Dave” Ruhl, from the Black Hills National Forest, was entrapped and killed while scouting on foot during initial attack (IA) of the Frog Fire on the Modoc National Forest in Northeastern California. The lightning-caused fire was detected at 1732, and an hour after ignition began to rapidly spread through pine, juniper, brush, and grass fuels under the influence of outflow winds.

2025 WOR: De Soto Prescribed Fire Helicopter Accident – March 30, 2015

six minutes for safety logo

Incident Summary:

On March 30, 2015, at approximately 1436, helicopter N50KH, a Type 3 rotor wing under contract with the USFS, experienced a catastrophic loss of engine power during prescribed fire aerial ignition Plastic Sphere Dispenser (PSD) operations on the De Soto National Forest in Mississippi. The helicopter came to rest within the burn unit after having been in the air for an hour and having already completed the first PSD flight leg. Three personnel were onboard. Pilot Brandon Ricks (age 40) of Blanchard, OK and Firing Boss Steve Cobb (age 55) of Wiggins, MS were killed.

2025 WOR: Letter to Leadership

six minutes for safety logo

The Week of Remembrance (WOR) was established in 2014 based on the 7-day span between June 30th and July 6th—the respective dates of the Yarnell Hill and South Canyon Fire tragedies. For 2025, WOR renews the wildland fire community’s commitment to this effort by adopting a new format that will be repeated annually. In a formal partnership between the Wildland Fire Lessons Learned Center and the 6 Minutes for Safety subcommittee, WOR will recognize fireline fatalities that occurred in the fire season 10 years prior. 2025 pays tribute to incidents from 2015 as follows:

NEW! S-130, Firefighter Training (Blended) Now Available

Date: June 10, 2025
If you have questions, please visit our FAQ page. 
If your question is not answered there, you can 
submit your question using our Contact Us form. 
 

The S-130, Firefighter Training (Blended), equips new wildland firefighters with essential skills through a mix of online learning and hands-on training. The course features a required online component and an instructor-led exercise, reinforcing online concepts with practical performance-based training.

The course builds competencies in wildland fire operations, safety, and equipment use, applicable across various operational environments. Both the online component and instructor-led field exercise must be completed to receive a certificate of completion. Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-130, Firefighter Training (Blended).

References:

S-130, Firefighter Training (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002

Subscribe to

NWCG Latest Announcements