Skip to main content

Planning Section Chief Type 1

PSC1 Incident Position Description

The Planning Section Chief Type 1 (PSC1) manages all aspects of incident planning, situation and resource status, and demobilization of an incident. The PSC1 supervises members of the Planning Section. The PSC1 is part of the Command and General (C&G) Staff and reports to the Incident Commander (IC) under typical incident organizations. The PSC1 works in the Planning functional area.

The PSC1 performs position duties commensurate with Type 1 incident complexity and characteristics stated in the Interagency Standards for Fire and Fire Aviation Operations (Red Book). (Type 1, 2 and 3 PSC duties are identical but performed at different complexity levels.)

Leadership Level 5, Leader of Organizations (Create Vision)

  • For additional information review Level 5 description, expected behaviors and knowledge, suggested development goals, and self-study opportunities.

Prepare and Mobilize

  • Ensure individual readiness.
  • Obtain and assemble information and materials needed for kit.
  • Gather critical information pertinent to the assignment.
  • Check in with incident supervisor and/or dispatch when arriving at the incident.
  • Review Incident Action Plan (IAP) and obtain briefing, objectives, and intent from supervisor.
  • Obtain briefing from previous shift/assignment PSC if available.

Build the Team

  • Assemble and validate readiness of assigned personnel and equipment.
  • Establish and communicate chain of command, reporting procedures, and risk management processes.
  • Identify, analyze, and use relevant situational information to make informed decisions and take appropriate actions.
  • Establish a common operating picture with supervisor and subordinates.
  • Brief assigned personnel.
  • Identify assigned resources and maintain accountability.

Supervise and Direct Work Assignments

  • Establish and communicate objectives, priorities, work assignments, and performance expectations.
  • Identify and communicate needs for Incident Command Post (ICP) work locations, equipment, and set up for assigned resources.
  • Identify, analyze, and use relevant situational information to make informed decisions and take appropriate actions.
  • Adjust actions based on changing information and evolving situation awareness.
  • Monitor performance and provide immediate and regular feedback to assigned personnel.
  • Develop and implement contingency plans. Communicate changing conditions to assigned resources and supervisor.

Perform Planning Section Chief Type 1-Specific Duties

  • Establish and maintain incident planning cycle. Communicate expected time frames for briefings, planning meetings, and team meetings to other section chiefs.
  • Organize planning meeting location and ensure necessary materials are available.
  • Facilitate meetings and briefings during the planning cycle.
  • Establish information requirements and reporting schedules for section.
  • Monitor incident status and coordinate with other command and general staff members to develop alternative strategies.
  • Manage the preparation of strategies and plans for the incident and submit incident status reports.
  • Identify kind, type, and quantity of resources necessary to achieve objectives.
  • Determine need for any specialized resources in support of the incident.
  • Request additional personnel, supplies, services, and equipment within the established ordering processes for efficient operations within the section.
  • Maintain a master list of all resources (e.g., key supervisory personnel, primary and support resources, etc.).
  • Supervise and configure section with units and single resources as necessary based on changes in incident situation and resource status.
  • Establish special information collection activities as necessary (e.g., weather, fire behavior, environmental, toxins, etc.).
  • Ensure the collection, processing, and organizing of all incident information.
  • Prepare, collect, evaluate, disseminate, and use incident information to develop the IAP.
  • Coordinate with all sections to assure the IAP as proposed can be implemented and supported by available resources and reconcile any differences.
  • Supervise or accomplish preparation and distribution of the IAP. Obtain elements from other appropriate sections within established time frames.
  • As needed, prepare future projections of incident growth, maps, and intelligence.
  • Ensure the Operations Section Chief identifies incident control lines, values to be protected, division boundaries and drop points, and prioritizes divisions ahead of allocating scarce resources.
  • Report any significant changes in status information, providing accurate and current situation as well as resource status information with accurate maps.
  • Identify or reaffirm incident objectives throughout the assignment.
  • Implement, describe, and utilize necessary agency policy, legal and fiscal constraints, and political considerations to be used in the planning meeting to review adequacy of strategic plans.
  • Maintain accurate and up-to-date incident files, provide duplication services, and ensure proper storage of incident files for legal, analytical, and historical purposes.
  • Work with technical specialist(s) [e.g., hazardous materials specialist, environmental specialists, Burned Area Emergency Rehabilitation (BAER) Team, and Resource Advisors (READ)] and keep updated on their activities.
  • Coordinate incident suppression repair needs with responsible agencies and technical specialist(s).
  • Ensure all incident reports and narratives are completed and debrief Agency Administrator (as directed) upon completion of the incident.

Communicate and Coordinate

  • Follow established processes and chain of command for collecting, producing, and distributing information.
  • Ensure clear understanding of expectations and timely communication within and across Incident Command System (ICS) functional areas and chain of command.
  • Establish communications and exchange necessary briefings/information with the following:
    • Support resources
    • Adjacent resources
    • Supervisor
    • Other ICS functional areas
  • Keep supervisor and assigned personnel informed of organizational changes.
  • Conduct and/or participate in After Action Reviews (AAR).

Manage Risk

  • Ensure risk management processes are maintained throughout the incident and reflected in IAP.
  • Plan for medical emergencies. Ensure that proper section develops the Medical Plan (ICS 206 WF) for inclusion in the IAP.
  • Account for location, health, safety, and welfare of assigned personnel.
  • Report all accidents or injuries to the incident supervisor.
  • Ensure compliance with all safety practices and procedures for assigned resources.
  • Ensure work/rest policy guidelines are managed for assigned personnel.

Document

  • Participate in the transition briefing for the incoming Incident Management Team (IMT) and include documentation such as transition planning documents.
  • Ensure adequate documentation of all actions taken in relation to incident planning.
  • Provide the host agency with an Incident Record Retention Kit.
  • Complete, authorize, ensure timeliness of, and route as required:
    • IAP (containing applicable ICS Forms)
    • Activity Log (ICS 214)
    • Incident Status Summary (ICS 209)
    • GIS Spatial Data and Maps
    • Crew Time Report (CTR), SF-261 (Watch: How to correctly fill out a CTR)
    • Incident Personnel Performance Rating (ICS 225 WF)
    • Other incident reports and narratives
    • Incident Record Retention Kit (Documentation Box)

Demobilize

  • Anticipate demobilization, identify excess resources, coordinate with operations to prepare demobilization schedule, and communicate with supervisor.
  • Plan for demobilization. Brief assigned resources on demobilization procedures and responsibilities.
  • Oversee preparation and implementation of the Incident Demobilization Plan.
  • Ensure incident and agency demobilization procedures and work/rest driving standards are followed.
  • Coordinate with local dispatch center to ensure air travel is coordinated efficiently.
  • Return equipment and supplies to appropriate unit.
  • Complete demobilization checkout process before being released from the incident.
  • Upon demobilization, report status to home unit including reassignment or estimated time of arrival (ETA) to home unit.
  • During transfer of command:
    • Ensure continuity of operations.
    • Exchange critical safety information.
    • Communicate transfer of authority through established chain of command.

Return to top

USWDS Paragraph Bundles

Please Provide Feedback

Indicates required field

NWCG values your constructive input and we thank you for taking the time to provide feedback.

Although contact information is optional, we hope that you provide a way for us to contact you in case we need clarification on your comment. If you would like to be contacted regarding your feedback, you must provide contact information. 

Would you like a response?
If you would like a response, you must provide contact information (name and email) below.
CAPTCHA
Image CAPTCHA
Enter the characters shown in the image.
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
Last Modified / Reviewed:

NWCG Latest Announcements

NEW! S-390, Introduction to Wildland Fire Behavior Calculations (Blended) Available Now

Date: December 22, 2025
Questions about RT-130? 
Please contact: Fire Behavior Subcommittee

NWCG is excited to announce that the new S-390, Introduction to Wildland Fire Behavior Calculations (Blended) training is now available on the Wildland Fire Learning Portal.

This third course in the series combines online and instructor-led training components aimed at individuals who are involved in planning, managing, and executing wildland fire and prescribed burn operations; who require a thorough understanding of fire behavior calculations to enhance effectiveness and safety. This includes students who require the knowledge and skill necessary to perform the duties of a Type 3 Incident Commander (ICT3), Division/Group Supervisor (DIVS), or Prescribed Fire Burn Boss Type 2 (RXB2).

Students are required to be qualified as any Single Resource Boss position and complete the prerequisite S-290, Intermediate Wildland Fire behavior (Blended) course, before enrolling in S-390.

References:

S-390, Introduction to Wildland Fire Behavior Calculations (Blended)

Wildland Fire Learning Portal

NEW! S-320, Introduction to Incident Management Teams (Blended) Available Now

Date: December 18, 2025
Questions about RT-130? 
Please contact: Incident and Position Standards Committee

NWCG is excited to announce that S-320, Introduction to Incident Management Teams (Blended) is now available on the Wildland Fire Learning Portal!

This blended course combines online learning with instructor-led training, designed for individuals seeking to build leadership skills and gain experience in incident management.

Students are required to complete the prerequisite trainings ICS-100, Introduction to Incident Command System (ICS), ICS-200, Basic ICS for Initial Response, and ICS-700, An Introduction to the National Incident Management System (NIMS) prior to attending S-320.

References:

S-320, Introduction to Incident Management Teams (Blended)

Wildland Fire Learning Portal

New! Ransom Road WFSTAR Module

Date: December 16, 2025
Questions about RT-130? 
Please contact: NWCG Audiovisual Specialist

NWCG is excited to announce the release of the new Ransom Road Fire Module to RT-130, Wildland Fire Safety Training Annual Refresher (WFSTAR).

This module features a firsthand account from Rob Lee, official reports, and animated maps of the Ransom Road Fire which occurred on June 8, 1981, in Florida's Merritt Island National Wildlife Refuge.

The module is available now in NWCG's RT-130, WFSTAR Catalog.

References:

WFSTAR Catalog

Wildland Fire Lessons Learned Center

Call for Nominations: Paul Gleason Lead by Example Award

Date: December 11, 2025
Questions? Please contact:
 Leadership Committee 

Do you know someone working in wildland fire who strives to make positive change and is undeterred by obstacles or setbacks? Now is your chance to give that person the acknowledgment they deserve by nominating them for a Paul Gleason Lead by Example Award.

This award, is presented by the NWCG Leadership Committee to remember Paul Gleason's contributions to the wildland fire community and to recognize individuals or groups that exhibit the same spirit and dedication to leadership – those who lead by example.

Nominations can be submitted via email with an attached Lead by Example Form to BLM_FA_Leadership_Feedback@blm.gov or through the online form

Tips for successful nominations and more information can be found on the Lead by Example webpage. All nominations must be submitted by December 31, 2025.

References:

Paul Gleason Lead By Example Award 

Paul Gleason Lead by Example Award Nomination Form 2025 

Leadership Committee