Skip to main content

Strike Team Leader Heavy Equipment

STEQ decorative banner: Three photos depicting strike team leader heavy equipment position, team leader group, leader directing dozer, leader with flagging. STEQ Position Description: The Strike Team Leader Heavy Equipment performs tactical missions on a division or segment of a division and is responsible for the safety of equipment, operators, and transports used to suppress, repair and rehabilitate wildland fires. The STEQ supervises two like pieces of heavy equipment and operators and reports to a Division/Group Supervisor. The STEQ works in the Operations functional area.

The Strike Team Leader Heavy Equipment performs tactical missions on a division or segment of a division and is responsible for the safety of equipment, operators, and transports used to suppress, repair and rehabilitate wildland fires. The STEQ supervises two like pieces of heavy equipment and operators and reports to a Division/Group Supervisor (DIVS). The STEQ works in the Operations functional area.

USWDS Paragraphs

Operations Section Chief (OPS3) Operations Branch Director (OPBD) Structure Protection Specialist (STPS) Division/Group Supervisor (DIVS) Task Force Leader (TFLD) Crew Boss, Single Resource (CRWB) Heavy Equipment Boss, Single Resource (HEQB) Engine Boss, Single Resource (ENGB) Felling Boss, Single Resource (FELB) Firing Boss, Single Resource (FIRB) Helicopter Manager, Single Resource (HMGB) Operations Section Chief (OSC2) Staging Area Manager (STAM) Air Operations Branch Director (AOBD) Air Support Group Supervisor (ASGS) Helibase Manager (HEBM) Deck Coordinator (DECK) Aircraft Base Radio Operator (ABRO) Helicopter Crew Member (HECM) Air Tactical Group Supervisor (ATGS) Helicopter Coordinator (HLCO) Firefighter Type 1 (FFT1) Firefighter Type 2 (FFT2) Strike Team Leader Crew (STCR) Strike Team Leader Heavy Equipment (STEQ) Strike Team Leader Engine (STEN) Operations Section Chief (OSC1) Advanced Faller (FAL1) Intermediate Faller (FAL2) Basic Faller (FAL3) Fixed Wing Base Manager (FWBM) Airtanker Base Manager (ATBM) Fixed Wing Parking Tender (FWPT) Mixmaster (MXMS) Retardant Crew Member (RTCM) Single Engine Air Tanker Manager (SEMG) Aircraft Time Keeper (ATIM) Ramp Manager (RAMP) Operations Section Chief (OSCC) Crew Representative (CREP)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Forest Service and Department of Interior are enabled by Administratively Determined Pay Plans (AD Pay Plans) to hire persons for temporary duration for the following reasons:

  1. To cope with a sudden and unexpected emergency caused by a fire, or extreme fire potential, flood, storm, or any other all-hazard emergency that threatens damage to federally protected property, has the potential to cause loss of life, serious injury, public health risk, or damage to natural or cultural resources unless brought under immediate control.
  2. To provide emergency assistance to States under formalized agreements.
  3. To meet mission assignments issued by the Federal Emergency Management Agency (FEMA).

The National Wildfire Coordinating Group (NWCG) Incident Business Committee (IBC) reviews positions annually and establishes pay rate classifications for each position.

For more information on the AD Pay Plans, visit Incident Business Committee.

Date: May 2025

Removed: from "These Positions Maintain Currency For STEQ":

  • Safety Officer, Line (SOFR)

Removed: from "STEQ Maintain Currency For These Positions "":

  • Safety Officer, Line (SOFR)

Added: to "These Positions Maintain Currency For STEQ":

  • Safety Officer Type 3 (SOF3)

Added: to "STEQ Maintain Currency For These Positions ":

  • Safety Officer Type 3 (SOF3)
Date: Jan 2024

Updated Positions Qualification Requirements as follows:

Added to "STEQ Maintains Currency For These Positions":

  • Safety Officer Field (SOFF)
Date: Jan 2023

Added: Operation Section Chief Complex (OSCC) to "These Positions Maintain Currency For STEQ."

Date: May 2019

Added: Incident Position Description (IPD) approved.

Date: Oct 2017

Removed: Tactical Decision Making in the Wildland Fire (S-336) from "Other Training Which Supports Development of Knowledge and Skills."

Date: Jun 2011

Position created.

Combined STDZ and STPL positions into a Strike Team Heavy Equipment (STEQ) position.

USWDS Paragraph Bundles

Primary Committee: Incident and Position Standards Committee
Steward: Incident Operations Subcommittee


Last Modified / Reviewed:

Please Provide Feedback

NWCG values your constructive input and we thank you for taking the time to provide feedback.

Although contact information is optional, we hope that you provide a way for us to contact you in case we need clarification on your comment. If you would like to be contacted regarding your feedback, you must provide contact information. 

Would you like a response?
If you would like a response, you must provide contact information (name and email) below.
One file only.
9.28 GB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, mp4, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.

NWCG Latest Announcements

Incident Position Standards and Next Generation Position Task Book Available for Firing Boss, Single Resource

Date: April 30, 2025
Questions?  Please contact:
Fuels Management Committee

NWCG is excited to announce that the NWCG Incident Position Standards for Firing Boss, Single Resource, PMS 350-105, and the NWCG Position Task Book for Firing Boss, Single Resource (FIRB), PMS 311-105, are now available. 

These resources, part of the Performance Support Package developed through the Incident Performance and Training Modernization (IPTM) effort, support trainees, qualified personnel, and evaluators. 

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1.

 

References:

NWCG Firing Boss, Single Resource Position Page

NWCG Incident Position Standards for Firing Boss, Single Resource, PMS 350-105

NWCG Position Task Book for Firing Boss, Single Resource (FIRB), PMS 311-105

Incident Position Standards and Next Generation Position Task Book Available for Helicopter Crewmember

Date: April 28, 2025
Questions?  Please contact:
Interagency Helicopter Operations Subcommittee

NWCG is excited to announce that the NWCG Incident Position Standards for Helicopter Crewmember, PMS 350-22, and the NWCG Position Task Book for Helicopter Crewmember (HECM), PMS 311-22, are now available.

These resources, part of the Performance Support Package developed through the Incident Performance and Training Modernization (IPTM) effort, support trainees, qualified personnel, and evaluators.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1.

References:

NWCG Incident Position Standards for Helicopter Crewmember, PMS 350-22

NWCG Incident Position Standards for Helicopter Crewmember, PMS 350-22

NWCG Position Task Book for Helicopter Crewmember (HECM), PMS 311-22

Updated NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

Date: April 23, 2025
Questions?  Please contact:
Interagency Fire Unmanned Aircraft Systems Subcommittee

The NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515 standardizes processes and procedures for the interagency use of Unmanned Aircraft Systems (UAS), including pilot inspections and approvals. This updated publication provides the aviation community with standards to ensure UAS are used safely, effectively, and efficiently in support of fire management goals and objectives.

References:

NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

NWCG National Interagency Aviation Committee

ETC Bulletin 25-001: Retrofitted Hot/Cold Beverage Kits - 2025 Field Season

Date: April 16, 2025
Questions?  Please contact:
Equipment Technology Committee

Due to spout failures and the associated risk of burn injuries, manufacturers have retrofitted the Hot/Cold Beverage Kits using a heat-shrinking band to secure the black spout at the insertion site. The updated kits feature a fluorescent label on each full kit assembly for easy identification. Catering units are encouraged to confirm the clear heat-shrinking bands are intact around each spout before filling.

ETC Bulletin 24-001 regarding Hot/Cold Beverage Kits has been archived and replaced by ETC Bulletin 25-001 for the 2025 season.

References:

NWCG Alerts

ETC-EB-25-001 Retrofitted Hot/Cold Beverage Kits