Skip to main content

Planning Section Chief Type 3*

PSC3 decorative banner: photos depicting PSC3 position.

The Planning Section Chief Type 3 (PSC3) manages all aspects of incident planning, situation and resource status, and demobilization of an incident. The PSC3 supervises members of the Planning section and may perform all functions of various positions in that section dependent upon incident complexity and assigned resources. The PSC3 is part of the Command and General (C&G) and reports to the Incident Commander (IC) under typical incident organizations. The PSC3 works in the Planning functional area.

The PSC3 performs position duties commensurate with Type 3 incident complexity and characteristics stated in the Interagency Standards for Fire and Fire Aviation Operations (Red Book). (Type 1, 2 and 3 PSC duties are identical but performed at different complexity levels.)

USWDS Paragraphs

Planning Section Chief (PSC3) Resources Unit Leader (RESL) Status/Check-in Recorder (SCKN) Situation Unit Leader (SITL) Field Observer (FOBS) Fire Effects Monitor (FEMO) Infrared Interpreter (IRIN) Display Processor (DPRO) Fire Behavior Analyst (FBAN) Strategic Operational Planner (SOPL) Long Term Fire Analyst (LTAN) Geographic Information System Specialist (GISS) Document Unit Leader (DOCL) Demobilization Leader (DMOB) Interagency Resource Representative (IARR) Human Resource Specialist (HRSP) Incident Training Specialist (TNSP) Planning Section Chief (PSC2) Planning Section Chief (PSC1) Planning Section Chief (PSCC)

 

The Forest Service and Department of Interior are enabled by Administratively Determined Pay Plans (AD Pay Plans) to hire persons for temporary duration for the following reasons:

  1. To cope with a sudden and unexpected emergency caused by a fire, or extreme fire potential, flood, storm, or any other all-hazard emergency that threatens damage to federally protected property, has the potential to cause loss of life, serious injury, public health risk, or damage to natural or cultural resources unless brought under immediate control.
  2. To provide emergency assistance to States under formalized agreements.
  3. To meet mission assignments issued by the Federal Emergency Management Agency (FEMA).

The National Wildfire Coordinating Group (NWCG) Incident Business Committee (IBC) reviews positions annually and establishes pay rate classifications for each position.

For more information on the AD Pay Plans, visit Incident Business Committee.

Date: Jan 2023

Added: 

  • Planning Section Chief Complex (PSCC) to "These Positions Maintain Currency For PSC3."
  • Planning Section Chief Complex (PSCC) to "PSC3 Maintains Currency For These Positions."
Date: Dec 2020

Added: Incident Position Description (IPD) approved.

Date: Oct 2019

Added: Qualification Requirements:  Note: Once qualified as SITL, RESL, or ICT3, the PSC3 qualification may be granted by the certifying official. Certification must be documented on a “verification/certification” page of the PSC3 Position Task Book (PMS 311-55).

Date: Oct 2018

Added: Type 3 All-Hazard Incident Management Team (O-305) to Other Training Which Supports Development of Knowledge and Skills.

Date: Oct 2016

Added: Introduction to ICS (ICS-100) and NIMS: An Introduction (IS-700) to Required Training.

Date: Oct 2015

Updated:  footnote language:

The Planning Section Chief Type 3 (PSC3) position is also utilized in the DOI All Hazard Qualification System. The FEMA All Hazard Planning Section Chief PTB is appropriate for use with this position and is available on the NWCG website.

Date: Oct 2014

Position created.

Type 3 Position standards are being introduced to provide an agreed to minimum standard for National Mobilization and to help develop local capability.  Currently the PSC3, LSC3, and FSC3 positions are utilized by FEMA and the Department of the Interior All Hazard qualification program.

NWCG recognizes the ability of cooperating agencies at the local level to jointly define and accept each other’s qualifications for initial attack, extended attack, large fire operations, and prescribed fire.

Position qualification pathways for the LSC3, PSC3, and FSC3 positions include both equivalency and position task book alternatives for position qualification.   FEMA position task books will be utilized for these positions and are available at training.fema.gov/position%20specific%20taskbooks/taskbook_list.asp.

USWDS Paragraph Bundles

Primary Committee: Incident and Position Standards Committee
Steward: Incident Planning Subcommittee


Last Modified / Reviewed:

Please Provide Feedback

NWCG values your constructive input and we thank you for taking the time to provide feedback.

Although contact information is optional, we hope that you provide a way for us to contact you in case we need clarification on your comment. If you would like to be contacted regarding your feedback, you must provide contact information. 

Would you like a response?
If you would like a response, you must provide contact information (name and email) below.
One file only.
9.28 GB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, mp4, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.

NWCG Latest Announcements

ETC Bulletin 25-001: Retrofitted Hot/Cold Beverage Kits - 2025 Field Season

Date: April 16, 2025
Questions?  Please contact:
Equipment Technology Committee

Due to spout failures and the associated risk of burn injuries, manufacturers have retrofitted the Hot/Cold Beverage Kits using a heat-shrinking band to secure the black spout at the insertion site. The updated kits feature a fluorescent label on each full kit assembly for easy identification. Catering units are encouraged to confirm the clear heat-shrinking bands are intact around each spout before filling.

ETC Bulletin 24-001 regarding Hot/Cold Beverage Kits has been archived and replaced by ETC Bulletin 25-001 for the 2025 season.

References:

NWCG Alerts

ETC-EB-25-001 Retrofitted Hot/Cold Beverage Kits

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412