Skip to main content

First Flight of the Huey – October 20th, 1956

This Day in History is a brief summary of a powerful learning opportunity and is not intended to second guess or be judgmental of decisions and actions. Put yourself in the following situation as if you do not know the outcome. What are the conditions? What are you thinking? What are YOU doing?

Summary:

There are few firefighters that will not have the opportunity to work with or be assisted by the world’s most famous helicopter, the Huey. The quintessential helicopter, the Huey is the pick-up truck of the helicopter industry. From large crew shuttles, buckets and sling loads, to rappel and short haul, this aircraft has become an icon of versatility and power. The Huey quickly developed its nickname from its designation of HU-1. The reference became so popular that Bell began casting the name on the helicopter's anti-torque pedals. The official U.S. Army name “Iroquois” was almost never used in practice. After 1962, the designation for all models was changed to UH-1 but the nickname remained.

The Huey story traces back over 5 decades to 1955 and the adaptation of the turbine engine to helicopter flight. The Bell Huey was the first mass-produced helicopter powered by a jet turbine. The piston-drive engines used in the 1950s and early 1960s were underpowered and not useful for most military missions. Although designed as an air ambulance, it was recognized even then that the Huey might turn out to be the most useful aerial platform ever put in production.

The Huey family of aircraft have totaled more than 27 million flight hours since October 20th, 1956 when the "granddaddy" of all Hueys, the XH-40, made its first flight. Since then, more than 16,000 Huey helicopters have been produced making it the most successful military aircraft in aviation history.


The original 1956 Huey XH-40 helicopter

Discussion Points:

Airtankers are a valuable asset in the control of wildland fires, but these aircraft can pose serious threats to the safety of air and ground personnel.

Hueys are a particularly noisy helicopter with its distinctive " whomp-whomp".

  • Hearing protection is a “must have” when around helicopters for the same reason that we wear it around chainsaws. Do you have ear plugs in your pocket?

The Huey saw combat in Vietnam in 1962, first as a troop transport and medevac helicopter and later as an armed assault helicopter used to protect troop transports. Troops could now be taken into and removed from key strategic positions.

  • There is no doubt about the convenience of using a helicopter to transport crews and equipment, but knowing the inherent risks of  helicopter flight, make sure to ask yourself before every flight, is this flight necessary? Review the Aviation section (blue) of the Incident Response Pocket Guide (IRPG), PMS 461

In Vietnam, up to 900,000 wounded were medically evacuated by Huey helicopters. As a result, 98% of wounded who survived the first 24 hours lived to return home.

  • There is always the possibility on any incident that someone might need to be medivaced. What plan do you and your crew have in place for this situation?

1970, The U.S. Marines wanted a more powerful version of the Huey equipped with two engines. They were concerned about an engine failure over water because helicopters are notoriously difficult aircraft to escape from, for they immediately turn upside down after hitting the water.

  • Identify situations where the best emergency landing zone is the water. Discuss this “what if” with your crew/group.
  • Did you know that water ditching training is available? Look for A-312 on www.IAT.gov

 

6MFS Suggestion Form


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

ETC Equipment Bulletin: 25-003 Flame-Resistant Shirt Survey

Date: June 12, 2025
Questions?  Please contact:
Equipment Technology Committee

The U.S. Forest Service National Technology and Development Program (NTDP) is seeking input on the Forest Service-designed flame-resistant (FR) shirt, currently available through the National Interagency Support Cache system and FedMall.

NTDP is conducting a product review to improve future FR shirt designs. As part of this effort, a short survey is now open for federal employees who have worn any of three recent FR shirt models. Feedback will guide design improvements to better meet the needs of wildland firefighters.

To comply with the Paperwork Reduction Act, responses are limited to federal employees. The survey is open through September 12, 2025. 

References:

NWCG Alerts

ETC Equipment Bulletin: 25-003

NEW! S-130, Firefighter Training (Blended) Now Available

Date: June 10, 2025
If you have questions, please visit our FAQ page. 
If your question is not answered there, you can 
submit your question using our Contact Us form. 
 

The S-130, Firefighter Training (Blended), equips new wildland firefighters with essential skills through a mix of online learning and hands-on training. The course features a required online component and an instructor-led exercise, reinforcing online concepts with practical performance-based training.

The course builds competencies in wildland fire operations, safety, and equipment use, applicable across various operational environments. Both the online component and instructor-led field exercise must be completed to receive a certificate of completion. Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-130, Firefighter Training (Blended).

References:

S-130, Firefighter Training (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002