Skip to main content

Tank – Collapsible, 10,000 GL

NFES #
007744
Category
Water Handling
Updated
Storage and Shelf Life Checks
None

Initial Inspection/Disposal Criteria

  1. Separate tanks by NFES number. Inspect for punctures, tears.  Look for damaged couplings, and drain plugs.  Inspect flanges and make sure threads are not damaged.
  2. Ensure ball bearings on fitting are working properly.  Repair or lube if necessary.
  3. Inspect seal around flange.  Replace to 2 ½” female flange if tank return is equipped with fittings other than.
  4. Return to stock if unused.
  5. Refurbish item if tears and holes are repairable with local equipment and expertise.  Contact manufacturer for repairs requiring materials or skills not found at the local cache to determine if it is economically feasible to have manufacturer repair tank.
  6. Dispose of item if unable to refurbish.

Refurbishing Procedures

A. Cleaning

  1. Elevate tank, securing the tank to lifting system with a chain or straps to bear the weight of the tank.
  2. Clean tank, inside and outside, with soapy water and a brush.
  3. Rinse well with clean water from high-pressure washer.
  4. Allow to air dry on both sides.

B. Repair

  1. While tank is suspended, mark any holes or damage needing repair.
  2. Patch any hole or tears.  Small pin hole can be repaired with manufacturer recommended TEAR-AID® Type B or other similar material recommended by the tank manufacturer.  Larger holes should be patched with material recommended by the manufacturer utilizing a vinyl welding process.  For extremely large holes, contact the tank manufacturer for recommended repair or replacement options.
  3. Replace all damaged hose couplings and drain plugs.
  4. Stencil correct NFES # of item on collar of tank if missing or unreadable.

C. Testing for performance

  1. Check all patches to insure they are secure and there are no loose edges.
  2. Suspend tank again to spot holes while looking towards light.

D. Repackaging

  1. Fold or roll tank as tightly as possible, secure with plastic banding or rope to keep from unrolling.
  2. 1 each of NFES  #006030, #006031, #007744 in NFES #008158 carton (48” x 22” x 31”).
  3. 1 each of NFES #000090, #000588, #000589, #000668, #000568 recommended in NFES #000500 carton (22” x 22” x 36”).

 

NWCG Latest Announcements

Incident Position Standards and the Next Generation Position Task Books Now Available for UASD, UASM, UASL and UASP

Date: July 31, 2025
Questions?  Please contact:
Interagency Fire Unmanned Aircraft Systems Subcommittee
 

NWCG is excited to announce that Incident Position Standards and the Next Generation Position Task Books are now available for all four Unmanned Aircraft Systems positions:

  • Unmanned Aircraft Systems, Data Specialist (UASD)
  • Unmanned Aircraft Systems, Manager (UASM)
  • Unmanned Aircraft Systems, Module Leader (UASL)
  • Unmanned Aircraft Systems Pilot (UASP)

The Performance Support Packages for these positions were developed as part of the Incident Performance and Training Modernization effort. These resources support trainees, qualified personnel, and evaluators in their respective roles.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1, scheduled for January 2026.

References:

NWCG Unmanned Aircraft Systems, Data Specialist Position Page

NWCG Unmanned Aircraft Systems, Manager Position Page

NWCG Unmanned Aircraft Systems, Module Leader Position Page

NWCG Unmanned Aircraft Systems Pilot Position Page

Incident Position Standards and the Next Generation Position Task Books Now Available for RADO and INCM

Date: July 30, 2025
Questions?  Please contact:
Incident Logistics Subcommittee
 

NWCG is excited to announce that Incident Position Standards and the Next Generation Position Task Books are now available for Radio Operator (RADO) and Incident Communications Center Manager (INCM).

The Performance Support Packages for these positions were developed as part of the Incident Performance and Training Modernization effort. These resources support trainees, qualified personnel, and evaluators in their respective roles.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1, scheduled for January 2026.

References:

NWCG Radio Operator Position Page

NWCG Incident Communications Center Manager Position Page

ETC Equipment Bulletin: 25-004 NEW Aquatic Invasive Species – Golden Mussels

Date: July 29, 2025
Questions?  Please contact:
Equipment Technology Committee
 

The Equipment Technology Committee (ETC) issued Equipment Bulletin: 25-004, notifying the wildland fire community about a newly discovered invasive species and actions to take if found. Golden mussels, a highly invasive species recently identified in California, pose a significant risk to native ecosystems, infrastructure, and fire equipment. These mussels rapidly colonize hard and soft surfaces, including aquatic plants and fire equipment, clogging pipes, fouling motors, disrupting water systems, and impacting native species.

To help prevent their spread, fire personnel must follow the decontamination procedures outlined in the NWCG Guide to Preventing Aquatic Invasive Species Transport by Wildland Fire Operations, PMS 444. Additionally, report any sightings immediately to your Lead Resource Advisor and include clear, close-up photos and location details.

Read the complete ETC Equipment Bulletin: 25-004 to learn more. 

References:

NWCG Alerts

ETC Equipment Bulletin: 25-004

NWCG Guide to Preventing Aquatic Invasive Species Transport by Wildland Fire Operations, PMS 444

Incident Position Standards and the Next Generation Position Task Books Now Available for ICT5 and FFT1

Date: July 29, 2025
Questions?  Please contact:
Incident Command Subcommittee
Incident Operations Subcommittee

NWCG is excited to announce that Incident Position Standards and the Next Generation Position Task Books are now available for Incident Commander Type 5 (ICT5) and Firefighter Type 1 Squad Boss (FFT1).

The Performance Support Packages for these positions were developed as part of the Incident Performance and Training Modernization effort. These resources support trainees, qualified personnel, and evaluators in their respective roles.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1, scheduled for January 2026.

References:

NWCG Incident Commander Type 5 Position Page

NWCG Firefighter Type 1 Squad Boss Position Page