Skip to main content

Repair Map

Note: The Situation Map has been deprecated as a map standard. The Operations map should be used as an acceptable substitute for task book purposes.

Product Description

The Repair Map is used to assist in tracking suppression repair efforts in the area of the incident. This product is used in operational planning and public meetings.

Target Audience

Operations Section, Resource Advisors, Agency Administrators, Local Unit. 

Guidelines

  • Standard Incident Command System (ICS) symbology.
  • Size varies but usually anywhere from tabloid (11” x 17”) to “Arch E” (36” x 48”) size.
  • Scale varies based on request, area covered, and map size.
  • May be one map for the entire incident or multiple maps for various areas of interest.
  • Distribution through the web should be considered.

Standard Elements

All map products produced should include the STANDL-SGD cartographic elements.

Data

  • Repair Status Layer.
  • Wildfire Daily Fire Perimeter (Polygon) with Contained and Uncontained Perimeter Lines.
  • Event Lines (including, but not limited to: Completed lines, Access Routes, Escape Routes).
  • Repair category Event Points (including, but not limited to: Culvert, Dozer Push, Fence – Cut/Damaged) .
  • Event Points (including, but not limited to: Camps, Dip Sites, Draft Sites, Drop Points, Helispots, Helibase).
  • Accountable Property.
  • Assignment (Division, Branch, Zone) breaks and labels.
  • Land Ownership / Jurisdiction.
  • Special Management Areas (including, but not limited to: Wilderness, Wilderness Study Areas, Inventoried Roadless Areas).
  • Structures.
  • Utilities (including, but not limited to: Powerlines, Substations, Pipelines).
  • Topographic or Orthoimagery Base.
  • Other Situation Unit Leader (SITL)-requested data.

Examples

These are examples from actual incidents and may include non-standard elements.
Also note that examples use the standard symbols at the time of their creation and may not reflect the current GeoOps symbology. Map elements, incident features, and composition remain consistent across these visual changes.

 

Share on Social Media

Last Modified / Reviewed:

Print PDF

NWCG Latest Announcements

NEW! S-390, Introduction to Wildland Fire Behavior Calculations (Blended) Available Now

Date: December 22, 2025
Questions about RT-130? 
Please contact: Fire Behavior Subcommittee

NWCG is excited to announce that the new S-390, Introduction to Wildland Fire Behavior Calculations (Blended) training is now available on the Wildland Fire Learning Portal.

This third course in the series combines online and instructor-led training components aimed at individuals who are involved in planning, managing, and executing wildland fire and prescribed burn operations; who require a thorough understanding of fire behavior calculations to enhance effectiveness and safety. This includes students who require the knowledge and skill necessary to perform the duties of a Type 3 Incident Commander (ICT3), Division/Group Supervisor (DIVS), or Prescribed Fire Burn Boss Type 2 (RXB2).

Students are required to be qualified as any Single Resource Boss position and complete the prerequisite S-290, Intermediate Wildland Fire behavior (Blended) course, before enrolling in S-390.

References:

S-390, Introduction to Wildland Fire Behavior Calculations (Blended)

Wildland Fire Learning Portal

NEW! S-320, Introduction to Incident Management Teams (Blended) Available Now

Date: December 18, 2025
Questions about RT-130? 
Please contact: Incident and Position Standards Committee

NWCG is excited to announce that S-320, Introduction to Incident Management Teams (Blended) is now available on the Wildland Fire Learning Portal!

This blended course combines online learning with instructor-led training, designed for individuals seeking to build leadership skills and gain experience in incident management.

Students are required to complete the prerequisite trainings ICS-100, Introduction to Incident Command System (ICS), ICS-200, Basic ICS for Initial Response, and ICS-700, An Introduction to the National Incident Management System (NIMS) prior to attending S-320.

References:

S-320, Introduction to Incident Management Teams (Blended)

Wildland Fire Learning Portal

New! Ransom Road WFSTAR Module

Date: December 16, 2025
Questions about RT-130? 
Please contact: NWCG Audiovisual Specialist

NWCG is excited to announce the release of the new Ransom Road Fire Module to RT-130, Wildland Fire Safety Training Annual Refresher (WFSTAR).

This module features a firsthand account from Rob Lee, official reports, and animated maps of the Ransom Road Fire which occurred on June 8, 1981, in Florida's Merritt Island National Wildlife Refuge.

The module is available now in NWCG's RT-130, WFSTAR Catalog.

References:

WFSTAR Catalog

Wildland Fire Lessons Learned Center

Call for Nominations: Paul Gleason Lead by Example Award

Date: December 11, 2025
Questions? Please contact:
 Leadership Committee 

Do you know someone working in wildland fire who strives to make positive change and is undeterred by obstacles or setbacks? Now is your chance to give that person the acknowledgment they deserve by nominating them for a Paul Gleason Lead by Example Award.

This award, is presented by the NWCG Leadership Committee to remember Paul Gleason's contributions to the wildland fire community and to recognize individuals or groups that exhibit the same spirit and dedication to leadership – those who lead by example.

Nominations can be submitted via email with an attached Lead by Example Form to BLM_FA_Leadership_Feedback@blm.gov or through the online form. 

Tips for successful nominations and more information can be found on the Lead by Example webpage. All nominations must be submitted by December 31, 2025.

References:

Paul Gleason Lead By Example Award 

Paul Gleason Lead by Example Award Nomination Form 2025 

Leadership Committee