Skip to main content

Firefighter Math: 7.4 Relative Humidity

Relative humidity is the percent of water vapor in the air compared to what would be present if the air were saturated. Fully saturated air is fog. Relative humidity is always expressed as a percentage.

Relative humidity can be determined by measuring the dry bulb and wet bulb temperatures in the field. Using these measured values, the dew point and relative humidity can be determined with the use of tables. These psychrometric tables are valid for specific elevation ranges because relative humidity and dewpoint change with atmospheric pressure, which varies with elevation.

Relative humidity also changes with temperature. Dewpoint, however, remains nearly the same as long as the moisture content of the air is not changing. This fact can be used to help estimate the minimum relative humidity for the afternoon, using the predicted high temperature for the day and the observed dewpoint. On a typical sunny day, temperatures in the lower atmosphere will decrease about 5.5 degrees F for every 1,000 feet in elevation. As temperatures approach the dewpoint, the same amount of water vapor will result in a higher relative humidity.

Psychrometric tables are provided in belt weather kits. You must use the chart for the elevation at which you are taking the observation because relative humidity and dewpoint change with atmospheric pressure, which varies with elevation.

Psychrometric tables relate dry bulb, wet bulb, dewpoint, and relative humidity.

Click on the graphic below to view a multimedia version of the psychrometric table lesson (includes audio), or read the text version of the steps involved below:

psychrometric table

1) Locate the wet bulb temperature among the numbers along the top row of the table. These are the wet bulb temperatures and are shown in green.
2) Locate the dry bulb temperature among the numbers in the far left column. These are dry bulb temperatures and are shown in black.
3) For a specific dry bulb temperature and wet bulb temperature, find the intersection of the appropriate row and column. The values at that point are the dewpoint temperature and the relative humidity. Within each box, the dewpoint is the top number (in blue), given in degrees Fahrenheit. The relative humidity is the bottom number (in red), given as a percent.

For example, for a dry bulb temperature of 40°F and a wet bulb temperature of 35°F, the dewpoint is 29° F and the relative humidity is 65%.

Test your knowledge by completing the following exercises. For each exercise, use your mouse to drag the magnifying square to find the appropriate relative humidity and dewpoint and type your answers into the spaces provided.

NWCG Latest Announcements

2025/2026 Leadership Campaign Quarter 2 Now Available!

Date: February 13, 2026
Questions? 
Please contact: Leadership Committee

NWCG is excited to announce that the Quarter Two materials for the 2025/2026 Wildland Fire Leadership Campaign are now available! This annual initiative invites all leadership and wildland fire management students to engage with essential skills and knowledge needed to lead effectively in dynamic environments.

This quarter focuses on Leadership Level 2: New Leader (Conveying Intent). Conveying intent is a crucial leadership competency in the high-risk, dynamic environment of wildland firefighting. Months 4 - 6 will concentrate on how successfully conveying intent enhances situational awareness, promotes shared understanding, and empowers firefighters to exercise initiative and adapt to changing conditions.

References:

2025/2026 NWCG Leadership Campaign - Leadership Levels

Wildland Fire Leadership Development Program

Leadership Committee

Opportunity to Serve the Wildland Fire Community as an IPTM SME!

Date: February 10, 2026
Questions? 
Please contact: NWCG SME Specialist

NWCG is seeking experienced wildland firefighters and support personnel to serve as Subject Matter Experts (SMEs) for the Incident Performance and Training Modernization (IPTM) initiative. The intent of IPTM is to transition NWCG’s training and qualification system to a performance-based model through updated position descriptions, Incident Position Standards, Next Generation Position Task Books (Next Gen PTBs), and updates to training where needed.

NWCG is currently recruiting SMEs for the following positions:

  • Aircraft Timekeeper (ATIM)
  • Compensation/Claims Unit Leader (COMP)
  • Cost Unit Leader (COST)
  • Crew Representative (CREP)
  • Deck Coordinator (DECK)
  • Fire Effects Monitor (FEMO)
  • Field Observer (FOBS)
  • Geographic Information System Specialist (GISS)
  • Ordering Manager (ORDM)
  • Receiving/Distribution Manager (RCDM)
  • Staging Area Manager (STAM)

Projects begin April/May 2026 and require 15–20 hours per month for 6–8 months, including a five-day workshop in Boise, Idaho this May. Apply by February 27, 2026, at the link below and review the attached document for details.

References:

NWCG SME Interest Sign-up

IPTM Subject Matter Expert Duties and Expectations Document

Incident Performance and Training Modernization (IPTM)

NEW! M-280, Resource Advisor, Fireline (Instructor-Led) Course Available Now

Date: January 29, 2026
Questions? 
Please contact: Resource Advisor Subcommittee

NWCG is pleased to announce the new M-280, Resource Advisor, Fireline (Instructor-Led) course is now available. This training supports individuals working towards Resource Advisor, Fireline (REAF) incident qualifications.

M-280, Resource Advisor, Fireline (Instructor-Led) training prepares students to serve as a Resource Advisor, Fireline (REAF) as defined in NWCG Incident Position Standards for Resource Advisor, Fireline, PMS 350-112. This course presents scenarios that reflect the diverse challenges a REAF may encounter during an incident. Through these scenarios, participants gain hands-on experience and an understanding of REAF responsibilities in a controlled learning environment.

References:

Resource Advisor, Fireline Position Page

NWCG Position Standards for Resource Advisor, Fireline, PMS 350-112

M-280, Resource Advisor, Fireline (Instructor-Led)

Wildland Fire Learning Portal

2026 Updates to the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1

Date: January 23, 2026
Questions? 
Please contact: Incident and Position Standards Committee

The Incident and Position Standards Committee has updated the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1.

These updates address changes to incident position names and requirements for qualification, training, and experience. Updates related to the implementation of Complex Incident Management (CIM) and Incident Performance Training Modernization (IPTM) are also included.

The NWCG Wildland Fire Position Qualification Flowchart, PMS 308 has also been updated to reflect the recent changes.

References:

NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1

NWCG Wildland Fire Position Qualification Flowchart, PMS 308

IPSC Memo 26-01: January 2026 Updates to the NWCG Standards for Wildland Fire Positions Qualifications, PMS 310-1